2.4G 4CH Mini RC Receiver Compatible FrSky D8 With PWM Output
A part of the review has been auto-translated.
made a mistake ordering this, if somebody need it i will give it
One seriously excellent Rx . Using my Taranis Q x7 Tx : I set the Tx to D8 ( 1-8 ) mode , and then turned on the bind function . With the Tx in bind function I pushed the Bind Button on the Rx and holding it down I applied power to the Rx . The bind was almost instant . Letting go the bind button and turning off the power to the Rx , I then turned off the bind function @ the Tx . Rx is bound and working just fine .. Range testing .. I have a maximum distance of 60 meters available .. With the Tx in range test mode facing the Rx there were no issues , turning 90deg away from the Rx there were no issues , turning 180 deg away from the Rx so that my body was between the Rx and Tx I lost the signal ( to be expected ) . This is a fantastic little Rx , I am very pleased with it . Now the only thing is you need to solder the pins to the Rx board ( servo connector pins ) .. I would really like to see this done already . But with this Rx being so small and light I can see where some folk might want to solder servo leads directly to the board to save weight .. For those ultralight situations . So if you can't solder ? Oh dear , this Rx might not be for you ... Is there a pre soldered version ? ( There should be - hint hint - nudge nudge )
Short out the 1st and the 3rd channel and you have a usable CPPM output at the 4th channel
Nice tiny Rx fully functionnal. Not soldered the connector like on the pic but on the other side of PC board and backwards to reduce total length. Heatschrink tube and voilà.
As always by Banggood fast and reliable shipping at least for my experience until now, the product and conforms to the stated specifications. The receiver is compact and easy to associate to the transmitter, in my case a Taranis QX7, I tested it over the counter say excellent obviously in line with the limits of its characteristics now I have nothing left but to try it in flight.
good small reciver light weight and long lenght controll
Small and light receiver.Work great on my Slofly22.
Quality Receiver. It works and I am satisfied.
ótimo produto dimensões nas fotos em anexo
Good product, I really pleased about it. I will make a video review of this product.