Customer Reviews

4.91 out of 5
See all 1102 reviews
Write a Review
  • All Reviews (1102)
  • Image (114)
  • Video (0)
  • All Star
    • All Star(1102)
    • 5 Star(1046)
    • 4 Star(34)
    • 3 Star(10)
    • 2 Star(1)
    • 1 Star(11)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
Show Original

A part of the review has been auto-translated.

  • AdiVIP5

    The unit is OK. I tested it for 24V input, 11V output ay 10A current. The output voltage is relatively constant (from 11.5V no load to 11.2V at 10A). The temperatures are: 100 dgr.C for transformer, 100 dgr.C for one heatsink and 80 dgr.C for the other.

    Comments (5)
    Show Original
  • 22/05/2020

    A good DC-DC converter. I use it to regulate the output power of a LED power supply for my hobby projects. The filter capacitor for the trimmer potentiometer has a dedicated spot on the PCB. This is not common for some of these boards which can be annoying when you want to replace the trimmers to some other potmeters. The solders look nice and clean. Heatsink goes hot when larger power is used, so it is a good idea to use some fan to keep it cool.

    Comments (2)
    Show Original
  • brocak

    Good DC to DC changer. Useful for your DIY projets. Up to 300W just with the quick cooler othervise it can burn-out very quickly. Good design with the srew in conductors sockets. On-off switch is also advantage. Just dont exceed the input voltage it has no overvoltage input protection. The parametric data included which is great.

    Show Original
  • 27/03/2019

    Great little power supply. unfortunately out of the 3 I purchased 2 of them had SMT components that were not soldered to the board correctly. the other board had been manually re-worked and the flux reside had not been cleaned off.. The quoted ripple voltage of 50mV is not accurate either, because it only has electrolytic filter caps on the output it has sharp spikes of over 300mV.. soldering some SMT ceramic capacitors across the output capacitors fixed this up and reduced the ripple to a very reasonable 10mV under 100W load. in my photos you can see where I soldered the ceramic caps. In my pictured the red circles are where I installed the ceramic caps. and the green circle is where the component wasnt soldered correctly on the 2 boards.... the glossy look is from a moisture proof laquer I applied to the boards

    Comments (2)
    Show Original
  • 12/01/2020

    Bought at the stock. The transducer is worth its money. Be sure to check if the elements are well tightened to the radiators. Replaced the potentiometers.

    Comments (4)
    Show Original
  • 04/11/2020

    very good, very easy to set up, using as current limiter for Banggood LED COB lights that were getting too hot

    Show Original
  • 30/04/2022

    Works great for DIY! don’t touch the circuit or especially not the radiators even when power is off. There is a lot of residual current sitting in it for a couple of hours. Use the one hand rule.

    Comments (1)
    Show Original
  • zvaraf

    I took some measurements. For input = 24V, output-min = 1.4v and output-max = 23V (Input Current = 12 mA and 31 mA when Output Current = 0 mA.) Input: 24V - 450mA when Output: 10V - 1A. Input: 24V - 68mA when Output: 10V - 83mA. In summary, I am satisfied with the product.

    Show Original
  • 16/06/2019

    Working's well.

    Show Original
  • 21/06/2022

    I tested the step down and reduces the voltage perfectly. Unlike others I bought similar these bring the heatsink a bit thinner. For the packaging I would recommend putting them a padded plastic base to protect the SMD components that are on the underside. In my case they have arrived perfectly but I recommend the above.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$7.49
    • US$2.99
    • US$6.99
    • US$4.99
    • US$1.99
    • US$1.99
    • US$3.40
    • US$12.99
    • US$1.99
    • US$6.29
    • US$33.99
    • US$1.99
    • US$36.00
    • US$5.99
    • US$96.59
    • US$9.99
    • US$29.99
    • US$1.40