Customer Reviews

4.79 out of 5
See all 319 reviews
Write a Review
  • All Reviews (319)
  • Image (42)
  • Video (0)
  • All Star
    • All Star(319)
    • 5 Star(289)
    • 4 Star(11)
    • 3 Star(8)
    • 2 Star(3)
    • 1 Star(8)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 06/07/2021

    Fast delivery to Sydney, unit with antenna is well packaged in small box. Without antenna is in anti-static bag only. Worked out of the box. Pre-loaded with a version of CameraWebServer.INO so after carefully connecting camera operation is simple: connect USB power, connect phone to new WiFi network ESP32 -CAM-MB, open browser and go to 192.168.4.1 to view stream.

    Comments
    Show Original
  • 25/06/2021

    Product as description. Tested ok working as expected. Recommend.

    Comments (1)
    Show Original
  • 02/03/2022

    Received a faulty one first but BG arranged a replacement once I contacted support and raised the complaint 👍 Remember, it comes with a default firmware loaded and you can just plug the board in a 5v USB power source and scan for "HK-ESP32-CAM-MB" wifi and connect, then you just need to load 192.168.4.1 in your browser to connect to the cam. If you want to load a new firmware then you will need to install CH340C driver first and then install the board "HK-ESP32-CAM-MB" in Arduino IDE and upload the sketch. Download instructions for HK-ESP32-CAM-MB are available in github/hkdoc/readthedoc/esp32 websites/forums. Also, refer the documentation available in this product's description. I'm using easytarget/esp32-cam-webserver from github which has more options than the default firmware. Overall, a nice & cheap board with all the required functionality. Thank you

    Comments
    Show Original
  • 31/01/2022

    Arrived sooner than expected. It's a very nice device I've configured in a few steps to work using Arduino IDE.

    Comments
    Show Original
  • 23/05/2022

    The product works perfectly, I recommend a room with a higher viewing angle, thank you very much for ordering Banggood!

    Comments
    Show Original
  • 29/07/2021

    Excellent device, adaptor is helpful and can be used for other Esp32cam boards. Using the supplied antenna I have camera set up about 30metres from Wifi base which is great. Check out Esphome on the net for cool ways to integrate with HomeAssistant.

    Comments
    Show Original
  • 02/01/2023

    The product arrived on day 8. As always, it was sent when you asked and it was packed nicely. I haven't gotten to the programming stage yet, but it's made of quality materials.

    Comments
    Show Original
  • 11/02/2022

    Delivery to Germany took 10 days, nice. From the image, you can see the FCC ID to get more information about the product and measurements. I tried the esp cam in combination with the usb board and it got recognized under Linux. In general, everything made a very stable impression. Therefore, all good I'd say.

    Comments
    Show Original
  • 03/09/2021

    The module is ready to work, the module generates its own Access Point server named ESP 32-CAM-MB. Just select this server on the phone Wi-Fi settings, (no passwords needed), then open chrome or google and introduces the IP address: 192.168.4.1. The image appears on the phone.

    Comments
    Show Original
  • 19/06/2023

    Unfortunately the item was a little damaged during the shipping, but the seller solved the case.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$54.05
    • US$4.99
    • US$2.99
    • US$6.99
    • US$2.99
    • US$3.99
    • US$23.99
    • US$11.99
    • US$6.40
    • US$35.99
    • US$25.75
    • US$7.99
    • US$5.99
    • US$4.99
    • US$23.99
    • US$11.65
    • US$4.99
    • US$16.99