All Messages

: what module is it

jakubzawadzanko 2021-01-08 02:59:15

weisy Module is 0.52 Module is Reference diameter divided by teeths, but this diameter is the outer diamter (21 T :12mm D) - the reference diameter is about 11mm - then 11 divided 21 = 0,5221 T: 12mm diameter 22 T: 12.5mm 23 T: 13mm 24 T: 13.5mm 25 T: 14mm

2021-01-10 10:17:11 (0)
Answers (4)

weisy i can't say, is better you ask to support, or buy the original spare for 10427-s 9106-S. or try to measure the diameter the original have 24T and if the diameter is the same than the 24T in this pack, but be sure need to be exact diameter and 24T if not can't mach. and the height: 9mm 24T: 13.5mm Diametral -- this need to be the same than the original same teeths and diameter, if not the Pitch DP can be diferent. Pitch: 48DP -- this is the deep of the teethsSuitable motor shaft diameter: 3.175mm But the better is you ask first to support or search for the original spare.

2020-02-04 01:23:14 (0)
Answers (1)

: can I run a 3s battery through this?

Slowmo gaming 2019-10-22 02:36:48

weisy Yes, is better if you use a cooler on the heatshink

2020-01-17 09:28:23 (0)
Answers (7)