DanSourmayo
Q: what is the maximum current it can handle?
Asked by Vishal Dhayalan on 2017-12-08 06:15:27
DanSourmayo I've had no problems at 1.5 amps.
2021-08-20 03:43:08 Helpful (0)
DanSourmayo Not a direct answer, but I ordered a 2 pin euro adapter to the UK and they supplied a euro to UK adapter. The UK plug is seldom in stock!
2021-08-20 03:38:14 Helpful (0)
DanSourmayo I have used up to 1.5amps without an issue. If you have a bench supply, you could sacrifice one connector and test how many amps it could handle.
2021-08-20 03:35:58 Helpful (0)Q: I am interested in buying two red one and a yellow one how do I go about this
Asked by BG575445913 on 2021-08-13 03:09:54
DanSourmayo You can add one colour at a time, and as many of that colour as you want, to your cart. So you can add two red to your cart, then add one yellow to your cart.
2021-08-20 03:32:38 Helpful (0)Q: Is there soft rubber tyres in each car instead of foam tyres ?
Asked by BG644127836 on 2021-03-30 08:37:28
DanSourmayo There is not an option for rubber tyres, though some other models do have rubber tyres.
2021-08-20 03:31:24 Helpful (0)
DanSourmayo You could solder a small resistor or potentiometer between the motor and board. You'd want to start by figuring out the number of volts the motor uses and calculate what resistance you should need to drop the voltage slightly.
2021-08-20 03:30:21 Helpful (0)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
DanSourmayo I don't believe so. This isn't the same as the microcontroller on the control board for that engraver. I'd suggest replacing the entire control board, as you'd have to find the correct microcontroller and find and flash the correct (potentially proprietary) software onto it.
2022-02-10 12:52:30 Helpful (0)