Customer Reviews

4.19 out of 5
Write a Review
  • All Reviews (47)
  • Image (1)
  • Video (0)
  • All Star
    • All Star(47)
    • 5 Star(30)
    • 4 Star(4)
    • 3 Star(7)
    • 2 Star(4)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
  • 2017-06-11 01:19:18

    Muy bonito los acabados en color cromado, ahora solo hay que programarlo y probar que funcione correctamente

    Comments
  • 2020-06-30 13:25:32

    it didn't work

    Comments
  • 2020-01-18 05:01:09

    Needed a new remote for security, they look smart

    Comments
  • spilias
    GR
    2019-10-31 05:57:05

    Fast delivery and great product !!!

    Comments
  • 2015-01-21 09:14:09

    Pay attention, the right procedure is this: (1)Press and hold both "lock" and "unlock" together until LED quickly flashes 3 times. (2)Do not release both "lock""unlock" buttons,release and press "unlock" 3 times.LED will flash 3 times after this action. (3) Release both buttons (4)Place the Original and Clone remotes together. (5)Press 1 button on the original remote which you want to copy and 1 button on the clone remote to which you want to copy simultaneously and hold them until LED flashes steadily

    Comments (2)
  • tonylm
    FR
    2017-03-21 07:59:32

    en fait facile a programmer: -3 secondes sur les touches du haut -garder appuyé la touche haute et presser 3 fois celle juste en dessous -lancer la telecommander a copier et en meme temps appuyer sur la touche a programmer (cela doit durer 3 a 5 secondes) un clignotement long confirme que c'est en ordre et Hop

    Comments
  • Thom_X
    HU
    2016-09-27 10:40:53

    The remote works as advertised, I tried it with two different remotes. Be aware, however that the description of the programming procedure is a bit misleading. It can be programmed the following way: 1. Press and hold Lock and Unlock for 3 seconds - led flashes 3 times 2. Now with Lock still pressed, release Unlock and press it 3 times - led flashes 3 times again. 3. Release all buttons, put the device near the remote you wish to copy. 4. Press and hold the button to be copied on the original device,

    Comments
  • 2015-07-07 04:34:42

    Have tried original method. I get 3 flashes (only once) (item 4) but not yet successful. My original key is labelled PDT KF04-433RC Modified (see reviews) Can't get two series of flashes on new key-fob as item 5. I waited over 10 seconds and did not get a second series of flashes. Any help how to proceed?

    Comments
  • 2016-05-18 15:37:20

    hi. i got 6 for me and friends. i did rxactly the guide to program a rc and it is sucefull. i check and it open the dorr. but later when i want to use it againg it looks like programed (led on) but door dont open. some time later when i push all buttons. it opeen somethimes others rc do others dont. but all the rest rc. old ones are working perfect. the problem are thoso 6 from here

    Comments
  • imikac
    HR
    2016-04-13 05:28:47

    Ordered a wireless remote control which I cannot copy from an existing remote, neither can I program it from the garage. I followed all steps, but once I want to program it (step 4), there is no way, that the clone blinks steadily, it just blinks 3 times...

    Comments (1)
Show:

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$4.99
    • US$4.99
    • US$6.99
    • US$5.99
    • US$5.24
    • US$5.99
    • US$12.99
    • US$4.99
    • US$20.46
    • US$35.68
    • US$2.09
    • US$13.99
    • US$15.99
    • US$7.39
    • US$11.99
    • US$9.99
    • US$173.49
    • US$5.99