erosffoeg
erosffoeg Waiting for any one to answer please
2024-02-03 03:50:04 Helpful (0)Q: Hi, How many 1*****.7V cells are inside and what is their (real) specification ?
Asked by erosffoeg on 2023-06-19 03:48:20Q: What is the temperature measurement refresh rate to control the output ON/OFF ?
Asked by erosffoeg on 2022-05-11 04:33:58
jirze Refresh time is 20 msec to ON, 30 msec to OFF. Approximately.
2022-07-03 01:54:56 Helpful (0)Q: Can I use this to measure temperature in my water heater (geyser)?
Asked by BG101517378 on 2022-05-12 12:45:42
erosffoeg The probes look to be water proof but I would not trust continuous immersion. Suggest you find a place that you can make probe external contact with the geyser tank skin directly.
2022-05-12 01:31:34 Helpful (0)
The seller Sorry, no refresh rate tested.
2022-05-17 01:22:06 Helpful (0)Q: What is the temperature measurement refresh rate to control the output ON/OFF ?
Asked by erosffoeg on 2022-05-11 04:35:06
The seller This does not test the refresh rate.
2022-05-11 09:08:24 Helpful (0)Q: low voltage supported or not.if the supported what is the lumit
Asked by BG231238194 on 2022-05-04 05:36:52
erosffoeg Hi, Sorry I do not have it yet - will try to answer when delivered.
2022-05-04 05:41:05 Helpful (0)Q: Can the 0V battery and 0V from panels be connected together ?
Asked by erosffoeg on 2021-06-02 10:38:44
kezbaroo Shortanswer is NO. The positives are all common and the negatives are all separate. If connected together the solar panel will be directly connected to the battery and will not regulate
2021-06-03 10:22:07 Helpful (2)Q: Are the input and output "GND"s directly connected ?
Asked by erosffoeg on 2022-04-26 03:19:38
The seller Yeah，that is right
2022-04-26 08:32:29 Helpful (0)Q: If button is held pushed does it ring continuously - else how long does it ring ? Thanks
Asked by erosffoeg on 2020-02-15 04:27:37
aqol no just once it rings
2022-03-28 03:27:13 Helpful (0)
erosffoeg Hi, Sorry I cannot help as mine has not arrived yet. However I intend to uses it as a CNC router and will make a clamp or fixing to fit it whatever size it is. Do not thaink it will be difficult as the body looks to be aluminium ( I hope !! ) therefore plenty of places to fit clamp etc. Maybe use the fixing points that were for the base plate ?
2021-11-29 03:28:22 Helpful (0)Q: Can the 0V battery and 0V from panels be connected together ?
Asked by erosffoeg on 2021-06-02 10:36:52
The seller Hi, it is for 12V/24V.
2021-06-16 03:18:47 Helpful (0)Q: Can the 0V battery and 0V from panels be connected together ?
Asked by erosffoeg on 2021-06-02 10:32:16
The seller Hi, could you provide more product parameters? It is for 12V/24V.
2021-06-15 09:41:10 Helpful (0)Q: Can the 0V battery and 0V from panels be connected together ?
Asked by erosffoeg on 2021-06-02 10:30:38
The seller we need to ask the supplier to get then answer
2021-06-04 10:45:21 Helpful (0)Q: any way to calibrate with external resistor?
Asked by Camwads on 2021-05-27 07:38:38
erosffoeg It uses an NTC resistor as the sensor like most other cheap meters. The NTC is very non-linear and so the NTC resistance is measured and then the non linearity is compensated for. Adding a series resistor will increase the displayed temp - and a parallel will decrease it. So yes you can calibrate that way - problem is though that the internal compensation will not now be correct and so high accuracy will only be a the calibrated temp. The error across a range of temps will be related to the amount of correction made at the calibration temp. NTC range is from several K down to low 100s.
2021-05-27 10:48:04 Helpful (0)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
The seller Hello, the supplier is on holiday and we can’t get a reply for the time being.
2024-02-05 04:44:12 Helpful (0)