Polizyste
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

Polizyste 26/10/2019
Differences between the new (above) and the older (below) Version. They changed it to Safe costs which decreases basically our safety: Removed fusable input current resistor. Removed some of the Input capacitance and a coil. Removed safety capacitor between primary and secondary side of the Board. I'm not amused and I'll take care in the Future ordering stuff Like that.
IMaxRC IMax B3 Pro 1.5A Balance Compact Charger for 2S-3S Lipo Battery
US$11.99 US$15.99
9
Recommendations
Comments (0)
Polizyste 17/01/2021
This is the cheapest, Most Well thought out toy I've ever owned so far. It is the best and cheapest Hobby Grade vehicle for beginners of racing and RC enthusiasts. I'm definetly Not willing to pay 150 and more for a Car of this scale. Pros are, 30min Play time, durability, includes remote charger batteries and canopy, spare parts, available to european customers, modifying and Community Support. Receiver Module works with Common v2x2 Protokoll so you can easily use a different Hobby Grade Radio. For drifting, imo increasing the stearing Angle is the Most effective modification so far. "Tuning" parts mostly Made out of Aluminium are also available but only a small selection is usable. Driving Cups, shock Towers, Motor mount, Differential housing, wheels and brushless motor are worth a try. What would recreational RC be without banggood. It would be expensive and stressful by constantly visiting import customs. THANKS A LOT TO YOU GUYS OVERSEAS!
Wltoys K969 1/28 2.4G 4WD Brushed RC Car Drift Car Two Battery 7.4V 400mAh
US$64.99 US$89.97
3
Recommendations
Comments (1)
Polizyste 17/01/2021
Will try this Combo on my Second k969.
Brushless 6000KV 2S 2.0mm Motor ESC For Wltoys Mini-Q RC Car Vehicle Models
US$18.99 US$26.99
0
Recommendations
Comments (1)
Polizyste 17/01/2021
Without Aluminium upgraded lower Arms, shocks are not compatible. Lower Arms aren't usable because adjustible upper Arms are Bad. Not possible to mount on Original plastic lower Arms.
4PCS 1/28 Upgraded Metal Shock absorber Wltoys 284131 K969 K989 K999 P929 Adjustable Tightness RC Car Vehicles Spare Parts
US$17.99 US$21.99
2
Recommendations
Comments (1)
Polizyste 28/07/2019
This ESC is a good option to drive Xing 2814 880kv motors. It gives very good punch and control on HQ 10x5x3 on 6S. To prevent breaking the battery pads I leaded the wire underneath the board and gave it enough space and safety in case of hard battery unplugging. Esc didn't get even warm, so there might be plenty room for bigger motors or higher kv setup allthough the AUW is about 1,4kg. I'm very impressed.
Upgrade 30.5x30.5mm Holybro Tekko32F3 Metal 65A BLheli_32 4-6S 4in1 ESC DShot1200 w/ F3 MCU & Current Sensor for RC Drone FPV Racing
US$82.99 US$99.99
3
Recommendations
Comments (1)
Polizyste 17/01/2021
Cups and shocktowers are fine. One Cup has wrong screw Diameter. Unusable. Upper adjustible Arms are different from picture. Too much wobble to Drive.
Wltoys 284131 Metal Full Set Upgrade For 1/28 P929 P939 K979 K989 K999 k969 RC Car Parts
US$12.99 US$45.99
0
Recommendations
Comments (1)
Polizyste 17/01/2021
K969 already CAME with Metal CVD so I have some spare ones.
4Pcs/Set WLtoys Metal Upgrade Drive Shaft Dog Bone For 1/28 RC Car P929 P939 K969 K979 K989 K999
US$12.99 US$15.99
0
Recommendations
Comments (0)
Polizyste 17/01/2021
Nicenicenice. Will use it in Future RWD Project. Does correct overstearing very precisly, much fun to use. Every Drift Enthusiast should have one.
AFRC GYS-1V2 Upgraded Drift RC Car DIY Gyro RC Car Parts
US$31.99 US$38.99
0
Recommendations
Comments (0)
Polizyste 17/01/2021
Better Look but Smaller Diameter and more wobbly than Original rims (k969)
4PCS Wltoys Metal Hub RC Car Wheel 1/28 For K989 And IW04M RC Car
US$14.99 US$17.99
0
Recommendations
Comments (0)
Polizyste 17/01/2021
Better GRIP than original k969 "compound" but Not suitable for my small space which measures 3x3 meters
SINOHOBBY Mini-Q3 Hard Tires Brushed RC Drift Car Spare Parts V28-086
US$7.99 US$9.99
0
Recommendations
Comments (0)
Fonster Kpro125 125mm Toothpick 2.5/3 Inch 3mm Arm FPV Racing Frame Kit Adjustable Camera
US$21.99 US$26.99

Q: What are the dimensions of the Motor mounting pattern? Descriptions says 9x12 thats pretty weird!

Asked by Polizyste on 2020-03-03 09:59:22

temporalflux It is a 9x9mm mounting pattern. Motors with a 12x12mm mounting pattern won't fit, even if you only use 2 screws.

2020-09-24 08:59:14 Helpful (0)
Submit
Answers (2)
Polizyste 16/12/2019
Very easy installation. AIO package in tiny 16x16 stack. Setup is with Betafpv 1204 5000kv Motors, 3" HQ props, Runcam Split 3 Nano. Great performance at AUW of 117gr on 3S.
GEPRC STABLE F411 BetaFlight OSD Flight Controller 12A Blheli_S 2-4S Brushless ESC 25/100/200mW VTX Stack 16mm*16mm
US$79.99
2
Recommendations
Comments (0)
Polizyste 06/12/2019
Canopy is absolutely amazing to hold a caddx beetle 25mw combo. Also really Like this way to Install rx antennas with small Tubes and the directional Video antenna. Canopy is Sold seperatly. Bottom Plate itself is unusable because the Motor center shaft holes are to small to fit the motor lock ring. Motor will be blocked.
URUAV UR12 Pro 115mm Wheelbase Carbon Fiber 2.5 Inch / 3 Inch Frame Kit for RC Drone FPV Racing
US$16.99 US$20.99
2
Recommendations
Comments (2)
Polizyste 13/11/2019
This camera provides the best Image experience I've had so far. It beats my complete collection of Runcam Eagle, and Eagle 2. The biggest andvantages are bigger FOV, 4:3 Ratio, better light handleing, no whiteouts, less size and wheight and a beautiful natural image. To be honest I'm powering the cam from the 5V source of my PDB because I don't like the Idea of powering it from a six Cell lipo with a voltage around 25V. In this Setup the camera didn't failed for me so far and I'm really Happy with oldschool analog Video Transmission! For lens Exchange I use Teflon Tape to prevent a loose thread.
Caddx Ratel 1/1.8'' Starlight HDR OSD 1200TVL NTSC/PAL 16:9/4:3 Switchable 1.66mm/2.1mm Lens FPV camera For RC Drone
US$31.99 US$38.39
6
Recommendations
Comments (0)
Polizyste 07/12/2019
I don't know what everything Iflight is doing right with this frame kit but there are so many good things about it. The grade of details is so freaking high that I'm not able to tell all of them. The price Point is pretty high compared to other (smaller prop area) frame kits but you get a big mother of all racing Drones with this kit. Following all the amazing things. 7.5mm thick arms, high quality carbon, deadcat Design, huge amount of details, good quality accessories. For best Video recording results, iflight should provide a GoPro (Not Session) mount Made Out of stiff Material to prevent shakiness. The available TPU mount is way to soft to handle the prop movement. I personaly will go for a custom Made Aluminium mount to get the best stability at low weight. This frame is a good start to get into professionial cinematic racing videography. Pretty nice ;)
iFlight DC10 V2 473mm 7.5mm Arm 10 Inch Long Range 3K Carbon Fiber Frame Kit for RC Drone Multi-Rotor
US$123.99 US$148.99
2
Recommendations
Comments (0)
Polizyste 17/01/2018
I ordered the 230mm version and it has the right length for my Martian II 220 running on 5" props. In my case the spare arms have exactly 110mm from the motor center hole to the mid point of the quad. Maybe the person who packed this order looked in my order history and has chosen the right length. I don't think so ;) Maybe there is a method for measuring half of 230mm somehow? I don't know but hopefully Banggood will add the right information soon. (Picture of measurement is attached)
Martian I II 190mm 230mm 255mm Carbon Fiber 4mm Arm Kit for RC Drone FPV Racing
US$5.00 US$10.99
11
Recommendations
Comments (1)
Polizyste 02/12/2018
Compared to the Mark II frame you get everything for a solid build including a HD camera Mount at a fixed angle for the half price of the Mark II. It's a stretched X design and the arm length is longer than i've expected. You can believe me that this is a good one. It does not speak for his innovative design but it does speak for it's unbeatable price. Thanks BG.
HSKRC Freestyle 250 248mm Carbon Fiber True X RC Drone FPV Racing Frame Kit 118g
US$39.99 US$47.99
1
Recommendations
Comments (0)
Polizyste 12/11/2019
The Flight performance is my best experience so far after using martian II, URUAV stuff, Mark 2 and some unknown Brands. It's a clever design since the top Plate is an inportant Part of the arm rigidity. Because it has more distance between the Front and Back arms, the stability in flight is extremely noticable. As a result your Motors need less force to stabilize and correct the Angle of the aircraft. I think i could easily lower my P values and have the same feel and Performance as one of my Mark2 builds. There is also a GoPro mount available which is at a really fair price of 10 bucks. For my Session I did a First try for a custom mount from Aluminium plate. Have fun trying this Jewel of a frame!
Geprc MARK4 225mm 5 Inch / 260mm 6 Inch / 295mm 7 Inch Frame Kit for RC Drone FPV Racing
US$58.99 US$70.99
2
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe