All Messages

Deegeetee This runs on AFHDS2 protocol. FS-i6 & FS-i6x uses both protocols, so are both suitable for this reciever

2022-03-30 06:47:03 Helpful (0)
Submit
Answers (3)

Deegeetee@mrexcel Youneed to change the FS-i6 to the old Flysky AFHDS mode and not use the native AFHDS2 mode, then it should work

javu312 21/11/2017
0
Comments (3)

Q: if the LED strips are 5v, why is the supplied transformer 12v?

Asked by Deegeetee on 2017-11-04 06:15:30

BG351738321 Hi, the strip light is DC12V not DC5V. .

2022-02-08 11:09:02 Helpful (0)
Submit
Answers (2)

Q: paket lengkap, atau hanya bodi pesawat aja?

Asked by Wantotris6 on 2019-06-09 08:28:57

Deegeetee Airframe & power system supplied. all you need to complete the build is the radio system & battery. The receiver needs to be a combined receiver & servo brick, compatible with your transmitter.

2022-01-24 04:13:06 Helpful (0)
Submit
Answers (1)

Q: Does this come with the appropriate cables.

Asked by BG441011473 on 2021-04-21 07:28:47

Deegeetee You don't need cables to use this, it utilizes the balance port on your lipo

2021-04-28 05:51:40 Helpful (0)
Submit
Answers (2)

Deegeetee The FSi6 does both AFHDS & AFHDS2A, so you should have no problem. You can find the correct place to locate the switch between the two protocols in the RX settings.

2021-02-04 11:10:48 Helpful (0)
Submit
Answers (2)

Deegeetee You should also check that you have your transmitter set as AFHDS 2A and not in the older AFHDS protocol. If you have, all the other answers are valid & will work.

2021-02-04 11:05:05 Helpful (0)
Submit
Answers (5)

Q: I can not bind with T8SG using flysky...what should i use?

Asked by Alex on 2020-12-16 09:52:09

Deegeetee If you can use the original Flysky & Turnigy AFHDS (not AFHDS2) protocol on your T8SG, then it will bind. If not the the Flysky FS-i6 or i6x transmitters can use both AFHDS 2 and AFHDS, so you can switch the Fs-i6 or i6x to the AFHDS protocol in the radio settings for the model you wish to use it in, as I believe this receiver brick uses AFHDS.

2020-12-24 08:22:35 Helpful (0)
Submit
Answers (3)

Q: I can use 2 Nano Simcards AND one extra Micro SD?

Asked by BG018257524 on 2020-11-24 04:47:10

Deegeetee Yes you can install 2 different nano sims, plus an sd card

2020-11-24 06:50:17 Helpful (0)
Submit
Answers (7)

Q: What version should I get for the USA?

Asked by BG349434433 on 2020-11-08 10:48:16

Deegeetee The Global version should be fine, has United States in Region settings

2020-11-08 03:03:53 Helpful (0)
Submit
Answers (6)

Q: Can i bind this to flysky Fs-i6X transmitter?

Asked by Ruel Tolosa on 2020-10-19 05:27:08

Deegeetee The transmitter can use AFHDS 2 and AFHDS., so yes, but you may have to switch the Fs-i6x to the AFHDS protocol in the radio settings for the model you wish to use it in, as I believe this receiver brick uses AFHDS.

2020-10-21 10:35:59 Helpful (1)
Submit
Answers (5)

Q: Have you Swedish language??

Asked by BG201537164 on 2020-10-06 10:46:54

Deegeetee Yes you can set the region to Sweden & the language to Swedish

2020-10-07 12:36:55 Helpful (0)
Submit
Answers (5)