All Messages

BG211711121 Head rod diameter 8.7mm x 10mm long, Rod diameter= *6mm x 45mm long.( for Drill grip) drive pin=2mm x 12mm long cross at Head of the rod.

2021-09-18 11:33:34 Helpful (0)
Submit
Answers (2)

Q: which foul are use gasoline or kerosene?

Asked by Sayedbakhtyar on 2021-04-24 10:19:09

BG211711121 This engine is using Gasoline 95

2021-09-18 11:23:06 Helpful (0)
Submit
Answers (3)

Q: Is this a 2 stroke or a 4 stroke engine?

Asked by thebimax on 2020-06-10 05:13:00

BG211711121 This is 4 stroke engine but spark plug will sparking everytime when the rotating wheel magnet passed magnetic sensor. In operation it is 4 stroke engine and spark plug will spark 2 times in one cycle instead of 1 time spark.

2021-09-16 11:11:44 Helpful (0)
Submit
Answers (2)

Q: Do you have to mix oil with the gas?

Asked by Robert on 2021-05-31 09:00:26

BG211711121 Only gasoline 95 is enough without mix lubrication oil

2021-09-16 11:06:08 Helpful (0)
Submit
Answers (2)

Q: what is the oil capacity

Asked by BG333845125 on 2021-05-12 09:21:33

BG211711121 For lubricant oil (l used 10w30 motor oil for car, without any issue) 4cc is max. in crank case and could not more than 2 cc when it running, otherwise the spark plug will be flood and it will not firing and oil will spray throughout from crankcase cap hole.

2021-09-16 11:03:20 Helpful (0)
Submit
Answers (6)

BG211711121 Gasoline will be the best suitable for the engine and it make easier to adjust idle speed and better handling throttle valve when opening and decreasing. Naphtha base will cause malfunction (Exam. engine speed will not constantly) on the engine in long run and movements parts will also worn out faster.

BG211711121 20/03/2021
3
Comments (1)