Todos los mensajes

Q: Will it work with 9v?

Preguntado por omerss sobre 2019-07-23 12:21:03

BG344336531 No, 12V

2022-10-02 08:21:58 Servicial (0)
Enviar
respuestas (7)

Q: I got only L what can I do?

Preguntado por Oshechterman sobre 2019-03-14 12:21:48

Yaswanthkk i didn't get u

2022-02-13 12:41:25 Servicial (0)
Enviar
respuestas (3)

Q: Does it fit to dominator v3?

Preguntado por omerss sobre 2019-11-29 09:54:25

lacvo Yes fits well

2022-06-18 11:39:43 Servicial (0)
Enviar
respuestas (3)

Q: When be available?

Preguntado por omerss sobre 2019-11-18 11:56:07

athensgr1 customer support

2022-03-08 09:47:06 Servicial (0)
Enviar
respuestas (5)

Q: What type is it fit for? (the hole)

Preguntado por omerss sobre 2019-07-23 01:10:39

silvioliveira everything will depend on how many parts of lights you want to control. 1 zone or more

2020-03-31 08:22:24 Servicial (0)
Enviar
respuestas (2)

omerss 1.close completely the curtain 2.long press the right button 3.it will start to blink after few sec 4.press once to open the curtain 5.when it completely open press once on the close button Thats it

2020-03-21 10:53:58 Servicial (1)
Enviar
respuestas (1)

Q: Can I use 3 for light and one for roller shutter? And if so how?

Preguntado por omerss sobre 2019-06-13 03:25:26

Kungergely In the way you want to you most probably can't. The roller shutter will take up two out of the 4 switches (see e.g. http ://www.homesystem.sk/uploads/2/8/0/2/28026557/published/kompozycja-280_1.png?1560329684 for an example of the way these roller shutters are wired) so you'd have only 2 switches left for the lights. Thus you'd have to connect two of your lights to a single switch output. Or you should just buy a 3-gang switch for the lights and then a separate 2-gang switch for the roller shutter. That's how these things are usually installed anyway (connected to a dedicated switch that is).

2019-12-25 04:46:30 Servicial (0)
Enviar
respuestas (1)