VGOOD 6A 2S 32-Bit Brushless ESC With 1.5A SBEC for Fixed Wing RC Airplane
A part of the review has been auto-translated.
Used it for the RC conversion of the 48cm glider (ID: 1310581). Used this motor: Racerstar BR1811-2000KV 2S Mini Brushless Motor (ID: 1525244). Had no problems at all. On the second picture you see the ESC on the left side. On the right side is the receiver.
actual weight is 11gm. havent hooked up yet but seems ok. maybe no better than my Hornet esc, and can get lighter drone esc for couple dollars more
in general, a successful line of controls.simple program and bec 1.5 that, very even..
Good and compact ..does its job well.
funktioniert gut an meinem Lidl Glider. Vorher aber auf jeden Fall die Anleitung lesen!!!
The esc works fine for me in a removable motor gondola on FVK elf with hacker a5 13s motor on 3s with Graupner 4,7x2,4 folding prop. But after being programmed with Progcard it looses its memory after few days. I had to reverse direction and set the break. Both lost forcing me to reprogram 2 times yet.
Excellent product. Very light and small ESC able to run on 2S with more than enough SBEC power for the type of radio fitment micro planes require. Have used them on a GWS PicoStick converted to brushless power and small electric gliders such as the 48" J&H Micro BoT with great results.
Awesome! They are great for lite and super lite 32 inches EPP 3D planes, combined with Sunnysky 2204 1800 KV motor and 8 X4.1 prop! These are my best!
Seriously, they are excellent for my 26 to 32 inches 3D airplanes! These ESC matched with sunnysky motors 2204 1800kv, 8 X4.1 props, 2s 450mha battery and this is it... a more than perfect set-up for 3D fun! Got 3 of these and all are good quality! Love it!
I use it in my 32" EPP super lite 3 D plane with my Sunnysky X2204 1800 KV and a 8X4.1 props! At full throttle, it can handle a solid 8 amps for few seconds and it stays pretty cool! So, lightweight, cheap, can handle a bit more than 6 amps without any problem.... this one is a winner for me!