A part of the review has been auto-translated.
This receiver worked well so far. The button makes the bind process easy and convenient eliminating the need for betaflight or cleanflight cli commands. As I was a bit rusty on wiring it up, I had to do some research which was easy enough but could have been prevented if a short instruction leaflet was provided. Black: GND Orange: +3.3V Grey: DSMX
It works great, be careful to power it to 3.3V otherwise it will go in failsafe all the time and you won't be able to use it, the communication protocol is SPEKTRUM1024 if your radio is DSM2, SPEKTRUM2048 if your radio is DSMX if the radio supports both of them I recommend the 2048 which has half the latency (11ms versus 22ms of 2048)
Compact and light mounted on top of the Flight-controller stack protection plate with sticky foam. Easy to bind with built in boot button but is strictly 3.3v only. Choose your antenna length I went with 6cm for a compact build.
Absolutely tiny. Fits on my thumbnail, weighs in less than 2grams with the 15cm Antenna included! Antenna is actually more than 16.5cm long. Bind button is very handy and the range is more than I will ever be able to tap into. I lost sight of my quad at ~300 meters away and there was still no breakup at all.
It is very easy to place it because of its small size. The long antenna provides good reception Range tested by Spektrum dx7 - 400m / 437yd
neatly arrived
I love these receivers. This is the 3rd one I've purchased. Great price, tiny and works great.
Der Empfänger ist sehr leicht. Koppeln funktioniert ohne Probleme. Sehr hohe Reichweite. Kann ich empfehlen!
très bonne portée sur mon q90 qui avait un rx dsm2 d'origine (attention le rx d'origine du q90 en dsm2 est buggué j'ai perdu un drone avec celui là). le red con est parfait il faut juste l'alimenter en 3.3v
Good