A part of the review has been auto-translated.
Tested, work well! Comes with Hall Sensor! But be careful, connect the Battery minus also to the frame of the Engine.
Excellent item . Connect the two wire out put to 3 volts .The ground wire is connected to the negative wire on the two wire output. The single wire output is connected to the spark plug.Finaly connect the hall sensor the three wire output. When you pass a magnet past the sensor you will get a spark!
Products delivered to you Really wonderful
replacement worked fine . Dont use 2 cell lipo. It makes the smoke come out.
Ok, this is the third CDI I’ve bought including the one that came with the blue “Hit & Miss” engine I bought last year. Hopefully this is the one that doesn’t burn up and stop working after a couple minutes of runtime. I won’t be buying another one after this, considering I’m into this engine for over $300.00 now.
I use this ignition for my own built engines.
Ware erhalten Alles bestens OK
Dear salesmen the shipment has just arrived at me, unfortunately the hall sensor is missing, an operation of the system is therefore not possible. Please send this part after me. Sincerely yours E.Rau
I use these on my my home build model engines, they are very good, they work well on 6 volts and nothing less. Just hook up a hall effect sensor via a servo extension lead and your up and running.
fast shipping, goods super, too bad that the Hall transmitter is not there