Customer Reviews

4.89 out of 5
Write a Review
  • All Reviews (376)
  • Image (29)
  • Video (8)
  • All Star
    • All Star(376)
    • 5 Star(343)
    • 4 Star(25)
    • 3 Star(8)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
  • February-10 2018 10:02:00

    Хорошая рама, посмотрим как выдержит краши. Единственное, что сменил, так это стойки поменял на меньший размер.. верхний этаж с аккумом будет ниже.

    Comments
  • May-31 2017 08:46:33

    This was my first quadcopter build and I was thinking to buy pre-made RTF model but decided to build my own with this frame. I was quite shocked to see that there wasn't any manual with the kit when I opened it; but there are a TON of videos on YouTube to guide you step by step through the setup. I also used a power distribution board from Banggood that had the 5v/12v BEC already in it, and the RS 20A 4 in 1 ESC to try and keep my center of gravity and a clean wiring setup. This frame WILL fit the 2205/2300kV Red RacerStar motors and the RS20A 4in1 ESC just fine.

    Comments
  • May-19 2016 08:28:37

    I'm flying this frame (and crashing) past month and it's still in great shape. So stiffness of this frame is pretty good. But there are some problems with this frame - so be aware. 1. It's bit smaller than original ZMR250, so PDB for v2 will not suit, won't fit 6" propellers etc.. 2. Holes for motors are small (more likely for 18xx motors). You'll hardly manage to fit 2 screws in place without modifications 3. V stands mounted on frame - its so hard to take them down.

    Comments
  • December-01 2017 04:59:50

    Frame arms are very sturdy. Assembly isn't that hard since parts fit together perfectly. however, I would recommend that you watch an online video about it. I would recommend you replace the stock landing gears with zip ties as they are prone to getting caught on stuff. Furthermore, carbon fibre conducts so always use nylon standoffs when mounting electronics Order extra arms as you will need them eventually

    Comments
  • January-22 2016 22:19:28

    This is my first newbie 250mm quad frame. Easy to assemble, lightweight and very sturdy. I crashed mine more than 5 times and the board has no damage yet. You will only break the nylon screws, which is good so that it will be the breaking point during crash impact instead of the more expensive main board.

    Comments
  • August-19 2017 05:27:37

    Incredibly good frame. High quality, very good material, precision of cuts in very high level. Everything fits together. Highly recommended.

    Comments
  • July-02 2018 17:16:49

    drone çok sağlam ve hoş görünümlü . . . .

    Comments
  • November-02 2017 08:13:48

    Dobra, mocna rama podstawa pod budowę drona!

    Comments
  • September-10 2016 13:00:10

    nice frame, took off two points for drilled holes not being same size and the face that the frame does not fit emax rs2205 motors. other than that very nice frame, feels sturdy, seems real CF as it is conductive (checked with multimeter)

    Comments
  • July-31 2016 00:13:43

    - Really good quality for a budget 250 - Thickness is pretty good - Can't go wrong

    Comments
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$17.92
    • US$52.61
    • US$17.80
    • US$35.61
    • US$2.44
    • US$27.55
    • US$31.79
    • US$56.77
    • US$48.59
    • US$19.39
    • US$15.47
    • US$12.99
    • US$9.50
    • US$3.84
    • US$3.17
    • US$3.81
    • US$12.99
    • US$15.89