Customer Reviews

4.91 out of 5
Write a Review
  • All Reviews (43)
  • Image (1)
  • Video (0)
  • All Star
    • All Star(43)
    • 5 Star(42)
    • 4 Star(0)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
  • SLRCC
    KR
    2017-08-24 11:11:52

    this is good deal n quality is best. Im using it for my rc car

    Comments
  • 2017-03-20 21:23:22

    It has a feedback mechanism, so the set output voltage will be maintained regardless of the input voltage (of course if it is lower). Would recommend for powering small electronics projects too from a battery. The max input voltage is 24 volts, so I wouldn't try it with 6s battery. Get a high power 12v BEC first, then use these to create the different voltage rails.

    Comments
  • 2015-04-14 03:34:46

    Works well. Is quite stable +- 0.01. Arrived in 9 days in the Netherlands. Using it to power down my battery and power motor's and a RaspberryPi. You do need a screw driver with almost a flat "+". Most of mine where to "pointy" to make it turn around!! One big problem though! The solder holes are very tiny. I am not a soldering pro, but also not a noobie (hopefully:p) but some of the converters didn't work after soldering. I thought I maybe made the parts too hot and killed the module. But after

    Comments
  • Terry
    AU
    2017-09-21 08:16:31

    I have used several of these to step 3S and 4S lipos down to 5 volts the work great so long as you don't needs lots of AMPs. I did have one DOA so when you order these make sure you have get some spares.

    Comments
  • jmat16
    ES
    2017-01-24 10:29:02

    Muy pequeño tamaño y el potenciómetro ajustable regula perfectamente el voltaje de salida. Sencillamente perfecto para mis deseos que era bajar la tensión de 5 voltios de un alimentador de telefonía a 3 voltios para alimentar una estación meteorológica.

    Comments
  • 2016-06-27 22:14:21

    Very small. Great for completed small projects that need a reliable power source. But I do wish it had a mounting hole. The bottom of the board is free of parts and solder joints, so I guess double sided foam tape will work for mounting.

    Comments
  • 2016-05-26 10:52:49

    Petites dimensions, bonnes performances. Attention de bien prendre soin lors de la soudure de points de masse (IN et OUT). La forte conductivité des larges plans de masse refroidie la panne du fer à souder. Insister !!!

    Comments
  • 2014-10-25 18:00:57

    These are great !! Very small and lightweight and easy to install. Use a multimeter to set them to the correct voltage. Ideal for leds on your multi-copter that need less voltage than your main battery is supplying. Great stuff and very cheap !!

    Comments
  • csaba62
    HU
    2016-08-04 10:00:22

    Sok-sok apro feladat van, amihez egyszerubb kész modulokkal dolgozni. Foleg ilyen jo aron. Thanx, Banggood!

    Comments
  • 2019-08-26 00:38:45

    This is the best kept secret for low power projects, beats any linear regulator - just keep input voltage above 5V otherwise it gets real jumpy.

    Comments
Show:

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$15.99
    • US$3.99
    • US$9.99
    • US$6.37
    • US$10.59
    • US$15.35
    • US$6.51
    • US$13.79
    • US$2.99
    • US$19.99
    • US$6.99
    • US$7.99
    • US$1.99
    • US$3.99
    • US$2.39
    • US$1.99
    • US$1.99
    • US$18.99