these wheels and tyres are very very very good I'm running them on my zd thunder thay grip really good handle a lot of speed Ezy to glue look awesome I have put a set on my xlfxo3 I will be getting more for My axial scx 10 thay are awesome on the crawlers as always Banggood you have fast post fantastic price fantastic service Banggood you are awesome

these wheels and tyres are very very very good I'm running them on my zd thunder thay grip really good handle a lot of speed Ezy to glue look awesome I have put a set on my xlfxo3 I will be getting more for My axial scx 10 thay are awesome on the crawlers as always Banggood you have fast post fantastic price fantastic service Banggood you are awesome

these wheels and tyres are very very very good I'm running them on my zd thunder thay grip really good handle a lot of speed Ezy to glue look awesome I have put a set on my xlfxo3 I will be getting more for My axial scx 10 thay are awesome on the crawlers as always Banggood you have fast post fantastic price fantastic service Banggood you are awesome

I've had these for a few months and I am mostly happy. As others have mentioned, the tires need to be balanced first if you're going to use them in a high speed RC car. I run mine on 3s and have had no problems. The rubber is very durable and the plastic is sturdy but light weight so I am actually getting faster acceleration than with my original FS racing tires. The car can finally do proper wheelies. For balancing I used these little magnets as weights and super glue to hold them to the inside of the wheel: https://www.banggood.com/100pcs-N50-Strong-Disc-Mini-Magnets-5x3mm-Rare-Earth-Neodymium-Magnets-p-985775.html?p=LN24205151027201606U I also taped the inside of the tires so they don't balloon up when going fast. I used gorilla tape but you can use any reinforced tape like for example this one: https://www.banggood.com/5CM-x-5M-Waterproof-Ripstop-DIY-Kite-Sail-Repair-Patch-Tape-p-1077459.html?p=LN24205151027201606U I also bought this extra wide aluminum hex hub set to push the wheels further out so the tires don't rub the body when the car is turning. https://www.banggood.com/RC-Aluminum-7_0-Wheel-Hex-12mm-Drive-4P-HSP-HPI-Tamiya-Car-p-1035543.html?p=LN24205151027201606U In any case, this is one of the best RC parts deals I have ever found and I think the wheels look great on my FS Racing 53810.

I've had these for a few months and I am mostly happy. As others have mentioned, the tires need to be balanced first if you're going to use them in a high speed RC car. I run mine on 3s and have had no problems. The rubber is very durable and the plastic is sturdy but light weight so I am actually getting faster acceleration than with my original FS racing tires. The car can finally do proper wheelies. For balancing I used these little magnets as weights and super glue to hold them to the inside of the wheel: https://www.banggood.com/100pcs-N50-Strong-Disc-Mini-Magnets-5x3mm-Rare-Earth-Neodymium-Magnets-p-985775.html?p=LN24205151027201606U I also taped the inside of the tires so they don't balloon up when going fast. I used gorilla tape but you can use any reinforced tape like for example this one: https://www.banggood.com/5CM-x-5M-Waterproof-Ripstop-DIY-Kite-Sail-Repair-Patch-Tape-p-1077459.html?p=LN24205151027201606U I also bought this extra wide aluminum hex hub set to push the wheels further out so the tires don't rub the body when the car is turning. https://www.banggood.com/RC-Aluminum-7_0-Wheel-Hex-12mm-Drive-4P-HSP-HPI-Tamiya-Car-p-1035543.html?p=LN24205151027201606U In any case, this is one of the best RC parts deals I have ever found and I think the wheels look great on my FS Racing 53810.

I've had these for a few months and I am mostly happy. As others have mentioned, the tires need to be balanced first if you're going to use them in a high speed RC car. I run mine on 3s and have had no problems. The rubber is very durable and the plastic is sturdy but light weight so I am actually getting faster acceleration than with my original FS racing tires. The car can finally do proper wheelies. For balancing I used these little magnets as weights and super glue to hold them to the inside of the wheel: https://www.banggood.com/100pcs-N50-Strong-Disc-Mini-Magnets-5x3mm-Rare-Earth-Neodymium-Magnets-p-985775.html?p=LN24205151027201606U I also taped the inside of the tires so they don't balloon up when going fast. I used gorilla tape but you can use any reinforced tape like for example this one: https://www.banggood.com/5CM-x-5M-Waterproof-Ripstop-DIY-Kite-Sail-Repair-Patch-Tape-p-1077459.html?p=LN24205151027201606U I also bought this extra wide aluminum hex hub set to push the wheels further out so the tires don't rub the body when the car is turning. https://www.banggood.com/RC-Aluminum-7_0-Wheel-Hex-12mm-Drive-4P-HSP-HPI-Tamiya-Car-p-1035543.html?p=LN24205151027201606U In any case, this is one of the best RC parts deals I have ever found and I think the wheels look great on my FS Racing 53810.

Fitted these to my HSP 1:10 94111 PRO and boy did it look HOT!! Wheels are soft and flexible so will have plenty of grip.Tyres doesn't come glued to the rim but easily done as the rubber is pliable. All in all, great value tyres and will buy more as spares! Delivery of these tyres was the fastest I've ever received from BG - 5 days! BG, please keep sending items via air parcel and you'll get more people buying!

Fitted these to my HSP 1:10 94111 PRO and boy did it look HOT!! Wheels are soft and flexible so will have plenty of grip.Tyres doesn't come glued to the rim but easily done as the rubber is pliable. All in all, great value tyres and will buy more as spares! Delivery of these tyres was the fastest I've ever received from BG - 5 days! BG, please keep sending items via air parcel and you'll get more people buying!

Fitted these to my HSP 1:10 94111 PRO and boy did it look HOT!! Wheels are soft and flexible so will have plenty of grip.Tyres doesn't come glued to the rim but easily done as the rubber is pliable. All in all, great value tyres and will buy more as spares! Delivery of these tyres was the fastest I've ever received from BG - 5 days! BG, please keep sending items via air parcel and you'll get more people buying!

Todo correcto, tienen una pinta estupenda, son para mi 10428, le quedan genial. Las recomiendo. Las coloque junto con un paso más grande de rueda 😁😁.

Todo correcto, tienen una pinta estupenda, son para mi 10428, le quedan genial. Las recomiendo. Las coloque junto con un paso más grande de rueda 😁😁.

Todo correcto, tienen una pinta estupenda, son para mi 10428, le quedan genial. Las recomiendo. Las coloque junto con un paso más grande de rueda 😁😁.

This rims not good to strong brushless models. Rim in my traxxas stampeede 4x4 and 3S Lipo explode :/

This rims not good to strong brushless models. Rim in my traxxas stampeede 4x4 and 3S Lipo explode :/

This rims not good to strong brushless models. Rim in my traxxas stampeede 4x4 and 3S Lipo explode :/

Perfect and bigger than I thought!!!! Nice on my Xinlehong 9125 !!!

Perfect and bigger than I thought!!!! Nice on my Xinlehong 9125 !!!

Perfect and bigger than I thought!!!! Nice on my Xinlehong 9125 !!!

Perfect fit for Traxxas Stampede 4x4 VXL TSM and it has an excellent grip on-road asphalt as well as off-road terrain sand dunes and dirt. For sure I will buy more for spare! Easy fix on the glue took me seconds to glue each tire (Medium Glue Used) - Happy Bashing and Safe Driving everyone!!

Perfect fit for Traxxas Stampede 4x4 VXL TSM and it has an excellent grip on-road asphalt as well as off-road terrain sand dunes and dirt. For sure I will buy more for spare! Easy fix on the glue took me seconds to glue each tire (Medium Glue Used) - Happy Bashing and Safe Driving everyone!!

Perfect fit for Traxxas Stampede 4x4 VXL TSM and it has an excellent grip on-road asphalt as well as off-road terrain sand dunes and dirt. For sure I will buy more for spare! Easy fix on the glue took me seconds to glue each tire (Medium Glue Used) - Happy Bashing and Safe Driving everyone!!

So now It's time for a review after few days of tests. Overall price vs what u get is ok. But I'm not so optymistic as when I got those wheels (prev. review). My setup is 4x4 BL monter truck 1:10, with about 40:60 (F:R) power distribution managed with diffrent oils thickness in differentials.And rear rims start to wear off after 3rd ride. No bashing, no special track, just some gravel/termac road xmas walks with kids. Was no power setup (stick to 2S/7A batt those runs, car can easy eat 3S/10A). wheels were glued before runs. Used extra metal washers to distribute power around rims, but still they start to wear way 2 early :/ so i suggest to just glue washers from start to reinforce rims mount point. photos - left side front wheel, right side rear 1st and 2nd u can see rear rims damaged plastic, 3rd photo - those washers were used - now I suggest get even bigger ones, biggest u can fit and glue them for good. other side (from hex) isn't bad, normal wear. about quality, rubber is v. nice, fits light offroad/crawling. for more aggresive ride would make side a little stronger. Rims should get only 2/5 start. weakest point of this item. change rims to stronger and that would be a superb wheels.

So now It's time for a review after few days of tests. Overall price vs what u get is ok. But I'm not so optymistic as when I got those wheels (prev. review). My setup is 4x4 BL monter truck 1:10, with about 40:60 (F:R) power distribution managed with diffrent oils thickness in differentials.And rear rims start to wear off after 3rd ride. No bashing, no special track, just some gravel/termac road xmas walks with kids. Was no power setup (stick to 2S/7A batt those runs, car can easy eat 3S/10A). wheels were glued before runs. Used extra metal washers to distribute power around rims, but still they start to wear way 2 early :/ so i suggest to just glue washers from start to reinforce rims mount point. photos - left side front wheel, right side rear 1st and 2nd u can see rear rims damaged plastic, 3rd photo - those washers were used - now I suggest get even bigger ones, biggest u can fit and glue them for good. other side (from hex) isn't bad, normal wear. about quality, rubber is v. nice, fits light offroad/crawling. for more aggresive ride would make side a little stronger. Rims should get only 2/5 start. weakest point of this item. change rims to stronger and that would be a superb wheels.

So now It's time for a review after few days of tests. Overall price vs what u get is ok. But I'm not so optymistic as when I got those wheels (prev. review). My setup is 4x4 BL monter truck 1:10, with about 40:60 (F:R) power distribution managed with diffrent oils thickness in differentials.And rear rims start to wear off after 3rd ride. No bashing, no special track, just some gravel/termac road xmas walks with kids. Was no power setup (stick to 2S/7A batt those runs, car can easy eat 3S/10A). wheels were glued before runs. Used extra metal washers to distribute power around rims, but still they start to wear way 2 early :/ so i suggest to just glue washers from start to reinforce rims mount point. photos - left side front wheel, right side rear 1st and 2nd u can see rear rims damaged plastic, 3rd photo - those washers were used - now I suggest get even bigger ones, biggest u can fit and glue them for good. other side (from hex) isn't bad, normal wear. about quality, rubber is v. nice, fits light offroad/crawling. for more aggresive ride would make side a little stronger. Rims should get only 2/5 start. weakest point of this item. change rims to stronger and that would be a superb wheels.

Wooowww so amazing, very happy with my purchase in banggood thank you, very affordable upgrade tire im so impressed the tire hold very will too big my 9125 hosim runs pretty..🤩

Wooowww so amazing, very happy with my purchase in banggood thank you, very affordable upgrade tire im so impressed the tire hold very will too big my 9125 hosim runs pretty..🤩

Wooowww so amazing, very happy with my purchase in banggood thank you, very affordable upgrade tire im so impressed the tire hold very will too big my 9125 hosim runs pretty..🤩

Второй раз беру , хорошие колеса , только при хорошем ударе ломает пластик самих спиц - хрупковат он . Сделал такие вставки из полистирола и вклеил на дихлорэтан надежнее стали ..

Второй раз беру , хорошие колеса , только при хорошем ударе ломает пластик самих спиц - хрупковат он . Сделал такие вставки из полистирола и вклеил на дихлорэтан надежнее стали ..

Второй раз беру , хорошие колеса , только при хорошем ударе ломает пластик самих спиц - хрупковат он . Сделал такие вставки из полистирола и вклеил на дихлорэтан надежнее стали ..