JCVMadriles
Q: In what temperature range does it work? (ºMinimo-ºMaximum)
Asked by JCVMadriles on 2019-07-19 05:07:33
BG155436444 I agree with Ralf
2023-05-18 04:59:14 Helpful (0)Q: I have bought 3 units of 10K and they work perfectly. Now I will need more 100K units. Do you have?
Asked by JCVMadriles on 2020-05-11 12:58:02
Xa1402 Ok
2022-10-22 04:10:49 Helpful (0)Q: What is the separation between the pins? 5.08 mm? Why are there four inlet and four outlet holes?
Asked by JCVMadriles on 2020-06-20 07:53:16
pablotronic the raster is 2.54mm. there are in total 8 pins. input 0 volt and input + voltage as well as output 0 volt and output adjustable voltage. each of this have 2 pins.
2022-05-08 06:58:33 Helpful (0)
Q: ¿Is it compatible with the 80NF70? Thank you
Asked by JCVMadriles on 2020-03-06 04:19:31
BigMac The 80NF70 is an N-channel 68 V, 0.0082 Ohm, 98 A, TO-220 Power MOSFET, and these are a lower voltage at 55V, however it depends on your application though, because many designers has over rated the components in their equipment to allow for manufacturers tolerances. They might be OK if for instance you were using them in a 48V or 36V electric bicycle controller or similar? They are cheap enough to try and see perhaps, but I would not risk using them in any life critical application or device such as a kidney machine or heart attack defibrillator though.
2020-03-07 02:02:16 Helpful (2)
ManEnder no
2021-12-18 12:25:06 Helpful (0)
Q: The speakers in my car are 8 Ohms. Is this device valid?
Asked by JCVMadriles on 2021-10-21 09:51:37
achiles1 σιγουρα.βαλε και σαμπγουφερ και ενισχυτη.σηκωνει τα παντα κλειστο.
2021-10-22 01:45:11 Helpful (0)Q: He does not know how to answer when asked what material it is made of? Is it NBR?
Asked by JCVMadriles on 2021-09-20 04:51:22
Lupar yes、NBR
2021-09-26 08:37:59 Helpful (0)
wujiahui Input voltage 4.0-40V Output voltage range of 1.25V-37V continuous adjustable (input voltage to the output voltage must be higher than 1.5v.) The output voltage can be adjusted by adjusting the potentiometer.
2019-07-21 08:31:29 Helpful (2)Q: Can you supply me with POM (acetal) of the CCTREE brand? Thanks
Asked by JCVMadriles on 2021-08-16 09:54:48
JunhanYu there is not POM type
2021-08-18 04:17:14 Helpful (0)
The seller As shown in the figure, the knob is made of metal.
2021-07-12 02:01:40 Helpful (0)Q: I asked him if he has a spare internal resistance. Does not answer?
Asked by JCVMadriles on 2021-04-27 04:41:24
Carbylam you can send an email for customer service help
2021-05-05 05:35:34 Helpful (0)Q: How many ohms does that resistance have? (sure does not respond)
Asked by JCVMadriles on 2021-04-29 04:49:05
The seller 75Ω
2021-04-30 12:51:24 Helpful (0)Q: Cual es el PIN SDA y cual es el SCL?
Asked by JCVMadriles on 2019-02-14 05:18:24
Coed no idea, can plug directly
2019-02-19 12:23:22 Helpful (0)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
.jpg)
wujiahui Oh,If change the 24V input for 12 V,the output will not be 5.3 V.
2019-07-22 08:14:33 Helpful (4)