JarmezrocksFPV
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

JarmezrocksFPV 09/03/2018
These lipo batteries arrived and look almost faultless with their quality. I am yet to try them to confirm but they appeared to be manufactured of decent quality materials? The wrap is even done in red glitter pearl colour. They feel quality to hold, they appear really firm and dense but naturally the sacrifice to the quality that these appear is the weight factor? They feel a lot more dense and heavier than most, but I feel that this is because they are my first 5S battery and have an extra cell to carry than most of my others? So time will tell if they stand up to the test?
ZOP Power 18.5V 1500mAh 5S 45C Lipo Battery XT60 Plug
US$26.77 US$27.84
0
Recommendations
Comments (0)
JarmezrocksFPV 26/02/2018
Decent quality FPV antenna. The seller should consider providing a much shorter and solid 45 degree adaptor as this antenna is quite heavy when it droops down hanging out in front of your FPV goggles. The current antenna cable is too flexi so it doesn't hold form. I purchased this after watching Bruce's (the old guy from NZ)review of these on YouTube, so I'm not phased by it's imperfections.....I simply hacked up the standard cable and made myself a solid 45 degree angle adaptor.
WYFPV 5.8G 16dBi LHCP Directional FPV Antenna for Video Receiver RP-SMA/SMA Red
US$14.99 US$22.79
3
Recommendations
Comments (0)
JarmezrocksFPV 26/02/2018
See how it goes without a protective plastic case on the helical part and go from there? an extra plastic cover will add unnecessary weight also so I think it will do good by it's self?
7cm 2.5dBi-3dBi 5.8G 4-Leaf RHCP Micro Clover Antenna IPX UFL For Mini FPV VTX
US$4.79 US$5.75
0
Recommendations
Comments (0)
JarmezrocksFPV 26/02/2018
I made several of these myself and I can honestly say my workmanship isn't as good? so thumbs up from me
1Pair XT60 Female Male Plug To XT30 Female Male Plug Connector
US$3.00 US$8.99
0
Recommendations
Comments (0)
JarmezrocksFPV 03/02/2018
Haven't yet tested but all appears to be ok and will know soon how it performs.
7.4V 2S 2000mAh 8C Lipo Battery Compatible for Frsky ACCST Taranis Q X7 Transmitter
US$18.62 US$37.24
0
Recommendations
Comments (0)
JarmezrocksFPV 03/02/2018
This thing looks better than the pictures! really happy with the quality. All I am waiting for now is for my new short throw gimbals to arrive. Weather is crappy anyway so I cant really test it anyway.
Frsky 2.4G 16CH ACCST Taranis Q X7S Carbon Fiber Water Transfer Transmitter Mode2 M7 for RC Drone
US$251.48 US$298.50
0
Recommendations
Comments (0)
JarmezrocksFPV 03/02/2018
Perfect battery. Works and tested fine. Would be great if the plug cord was slightly longer to allow the pack to sit in the battery pouch of my AOMWAYs, the add didn't specify they fitted AOMWAYs anyway and only two suppliers listed would ship batteries to Aust so I had no real choice So thanks to the supplier for getting this to me.
TATTU 2500mAh 2S1P 7.4V LiPo Battery DC 5.5mm*2.1mm With LED Indicator Button For Fatsahrk Aomway Skyzone Eachine Goggles
US$30.71 US$36.85
3
Recommendations
Comments (0)
JarmezrocksFPV 03/02/2018
These look really well made and appear to be great size for their capacity and especially considering they are a 4S! My micro is go to punch so hard with this thing! can't wait
ZOP Power 14.8V 600mAh 70C 4S Lipo Battery JST XT30 Plug for FPV Racing Drone
US$9.65
0
Recommendations
Comments (0)
JarmezrocksFPV 03/02/2018
These look very well made. The battery looks to be very strong and robust, although a little bit bulky. I suppose wait is compromised for durability, so over all that's a plus
ACE TATTU 11.1V 850mAh 75C 9.44Wh 3S 1P Lipo Battery XT30 Plug
US$26.99 US$32.99
0
Recommendations
Comments (0)
JarmezrocksFPV 02/02/2018
Usually I wait longer for these things to arrive from China. All parts and items were spot on and I am very please. Thanks and I highly recommend this supplier
6 Pairs Emax AVAN Micro 2 Inch 4-blade RC Drone FPV Racing Propeller for 11XX 4500-6500KV Motor
US$3.05 US$13.99
0
Recommendations
Comments (0)
JarmezrocksFPV 02/02/2018
Usually I wait longer for these things to arrive from China. All parts and items were spot on and I am very please. Thanks and I highly recommend this supplier
1 Pair Aomway 5.8GHz 3dBi 4 Leaf Clover RHCP FPV Antenna SMA/RP-SMA w/Canopy for RC Drone Goggles Monitor
US$15.35 US$18.41
0
Recommendations
Comments (0)
JarmezrocksFPV 02/02/2018
Usually I wait longer for these things to arrive from China. All parts and items were spot on and I am very please. Thanks and I highly recommend this supplier
HTRC T240 DUO AC 150W DC 240W 10A Touch Screen Dual Channel Battery Balance Charger Discharger
US$69.99 US$89.99
0
Recommendations
Comments (0)
JarmezrocksFPV 02/02/2018
Usually I wait longer for these things to arrive from China. All parts and items were spot on and I am very please. Thanks and I highly recommend this supplier
XT60 Plug Parallel Charging Board For ISDT Q8 D2 Q6 T6 Lite ToolkitRC M6 M8 Charger
US$18.99 US$22.99
0
Recommendations
Comments (0)
JarmezrocksFPV 02/02/2018
Usually I wait longer for these things to arrive from China. Shipping was really fast! From my understanding Emax are one supplier to who really values their customers feedback/advice. So what I am sharing are NOT critical issues, just pointers for Emax to consider? Here are the changes that I have made that I feel if they were included, would make this thing the ultimate micro! 1. A slight change to the canopy design to allow more protection to the FPV camera (I have made a peak/visor out of an old credit card with 2 tiny holes and it basically sits in between the camera and canopy and can rotate forward and back along with the adjustable tilt of the camera - I used carbon vinyl wrapped to make mine look the part) Refer to Picture 1 for reference. 2. I've taken the time to completely RF shielded every component on this quad (quite fiddly to do) to aid frequency interference that seems to be an issue with all quads, not just this one. I used proper RF shield used in computer components (Apple iMac) for this purpose (difficult to see but refer to Picture 5 to see it protecting the VTx transmitter) 3. I carefully turned the capacitor to the side to save it from being damaged. This design from all reviews seems to be fine left as it is but Emax should consider doing as per Picture 2 4. I rerouted the wiring and plug configuration to allow all plugs to be servicable on one side of the quad and all channel selection for radio and VTx to be on the other side of the quad. Nothing needed to be cut or modified for this, but it is neater in my opinion. Refer to Pictures 3 and 4 5. The wires to the motors should really be retained to aid with hooking them should you crash. Some people use heat shrink, I simply used black electrical tape. Refer to picture 1 6. The last thing is just something I always feel is lacking on quads and that is full cross over battery strap. I have utilised a full sized strap from a larger quad to run full length of the battery as well as retaining the factory strap. This should allow the battery to remain fully fastened to the quad no matter how serious the accident and no matter what direction the impact is from. Picture 5 possible best displays how I have done this Please Note: None of the above is completely necessary Thanks Emax and I will recommend this supplier for anyone looking to purchase a quality product!
Emax Babyhawk-R RACE(R) Edition 112mm F3 Magnum Mini 5.8G FPV Racing RC Drone 3S/4S PNP/BNF
US$135.06 US$202.84
6
Recommendations
Comments (0)
JarmezrocksFPV 02/02/2018
Hi, Great product. Need to confirm that HDMI is working, but otherwise seems to work as intended. The listing did actually mention head tracking but was considerably cheaper than all others listed, I don't use head tracking anyway but the supplier should note this for future reference. Nothing else to add at the moment as I am I haven't fully tested the product. So far so good though
Aomway Commander Goggles V1 FPV 2D 3D 40CH 5.8G Support HD Port DVR Headtracker For RC Drone
US$312.07 US$474.36
0
Recommendations
Comments (0)
JarmezrocksFPV 26/01/2018
Shipped very fast. The item looks very well made, although I am yet to test it, it appears to be just like the one in the YouTube clip on the item listing
Digital LCD Prgramable Solder Iron Station Built-in Acceleration Sensors with STM32 Chip Embedded Interface DC 5525
US$55.61 US$69.56
0
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe