All Messages

Q: The esc and the motor admit 4s batteries?

Asked by Quino on 2019-06-22 04:52:27

OPELFRIK Yes,I fly with 3300 4S lipo at full throttle is around 30A

2020-12-22 09:39:11 Helpful (0)
Submit
Answers (1)

Q: Does the FPV camera have mirror and flip function?

Asked by Heclo on 2020-10-08 01:35:28

OPELFRIK It can flip image up side to down but not left to right.

2020-12-22 03:36:13 Helpful (0)
Submit
Answers (3)

Q: What does it use for Analog or Digtital

Asked by BG594982516 on 2020-12-21 10:13:25

OPELFRIK It have Analouge FPV output and 4K recording in mp4.

2020-12-22 03:33:56 Helpful (0)
Submit
Answers (1)

OPELFRIK i have this motor on WING ZETA Z-84 with 1500mah 3S Lipo and 6x4 prop. AUW is 420 gr. and have almost ulimited vertical clime, So it must be enought for normal flight for you. You can check one class bigger motor like RACESTAR BR2216 some Kv with 6x4 prop.

2020-12-12 03:24:20 Helpful (0)
Submit
Answers (3)

Q: What is the awg size for the motor wires?

Asked by Jimcog60 on 2020-11-11 02:52:51

OPELFRIK theyare in diameter 0.62 milimetres

2020-11-13 04:46:20 Helpful (1)
Submit
Answers (2)

OPELFRIK F4have voltmeter sensor, but don't have ampermeter. It s show you because you have in BF selected ampermeter which doesnt exist. just disablet it.But you can add aftermarket current sensor , because FC have free CRT pad to connect exgternal Current meter.

2020-11-13 04:42:06 Helpful (0)
Submit
Answers (1)

Redolent Yeah,that isOK.

2020-10-13 08:58:04 Helpful (0)
Submit
Answers (1)

Q: what is code key?

Asked by psb3958 on 2020-04-17 09:14:29

OPELFRIK Buttonwhich you press when you want to bind your receiver with transmiter :)

2020-09-13 01:10:24 Helpful (1)
Submit
Answers (1)

Q: what video goggles are compatible with this?

Asked by SadiCesur on 2020-08-03 01:32:13

OPELFRIK AllFPV goggles with 5.8gHz video receiver

2020-08-16 08:16:59 Helpful (1)
Submit
Answers (1)

OPELFRIK you can use whatever RX which output SBUS, PPM or IBUS signal. I use 450

2020-08-06 03:59:29 Helpful (1)
Submit
Answers (3)

Q: Hello! Could you tell me please which is the diameter of the antenna?

Asked by luismontespalma on 2019-02-26 01:51:27

OPELFRIK 15mmwith blue shring tube

2020-08-04 10:47:25 Helpful (1)
Submit
Answers (1)

Q: Is it send with the new TBS Crossfir Micro Tx V2 Modul?

Asked by Josef Noppenei on 2020-07-11 03:13:11

OPELFRIK No, you get TBS Crossfire Micro TX V1

2020-07-12 12:05:04 Helpful (1)
Submit
Answers (4)

Q: can we change the output power from ground(smartauidio)

Asked by gogenternt on 2020-05-22 02:15:47

OPELFRIK In Description say it's support IRC TRAMP protocol.

2020-07-04 04:15:55 Helpful (1)
Submit
Answers (2)

Q: where can I buy the Led lights and led controller?

Asked by gcl_2000 on 2019-06-25 12:00:17

OPELFRIK searchfor 1. MAMBA 1755 POD LED WS2812 main and side LEDS 2. MAMBA ARM LED WS2812

2020-07-04 03:21:10 Helpful (1)
Submit
Answers (1)

Q: mounting screw hole spacings?

Asked by ben.l.henry on 2019-07-22 03:30:40

OPELFRIK Screwsspacing is in diameter 6.6mm, but it is standart spacing at 65 and 75mm frames.

2020-06-26 04:28:34 Helpful (1)
Submit
Answers (1)

OPELFRIK HI, yes you can fly it with this new transmiter. Just set it for FRSKY D8 protocol on which your Novice work. happy flying

2020-06-17 03:49:54 Helpful (1)
Submit
Answers (1)