All Messages

george7n swapped motors and now that motor spins kind of erratically?...yes, looks like the ESC on the board...you can try this process to fix but youigut have to replace that board entirely: 1_check for any physical contact issues (using a connection tester) on that motor connector on the board - I remember one time I had a similar issue and I simply re-soldeted that connector and that fixed the issue :-) also try 2_reflash your board in Betaflight and also reflash your ESC firmware in BLHeli....if still faulty then replace the FC board completely

george7n 24/03/2021
0
Comments (3)

george7n these have standardized mounting hole distances (just checked) for the 3-hole mounting design....around ~ 5.5mm....I have used them on many 3-holed frames and it was OK 👌

2021-10-06 02:30:48 Helpful (0)
Submit
Answers (1)

george7n the Gemfan D51 has 5 blades and these ones have 4 blades. they both have a mounting hole of 1.5mm and 2" (~50mm) sized...YES, they both can be used on that Cine 8....Differences between blades used: with the 4 blade propeller you will get more speed compared to a 5 blade....however using the 5 blade will give you more stability-control compared to a 4 blade...my recommendatio is to use 5 blade if you after more stability in your footages....but if you want to film fast moving targets, then switch to 4 or even 3 blades

2021-10-06 02:07:32 Helpful (0)
Submit
Answers (1)

george7n it is just a case....without a disc...good quality product

2021-10-06 01:58:23 Helpful (0)
Submit
Answers (1)

Q: Are ipex 1?

Asked by mach74 on 2021-10-05 05:40:51

george7n these are the latest U.FL types => high frequency miniature coaxial interconnection type IPEX

2021-10-06 01:57:14 Helpful (0)
Submit
Answers (1)

george7n well, I have managed to strip and cut some very small and thin wires....with a lot of patience :-)

2021-10-04 05:25:31 Helpful (0)
Submit
Answers (2)

george7n unfortunately I still ca not record in 1080p with this Hawkeye product (tried everything)....so I am switching over to RunCam....have now 3 RunCam units and they work perfectly... my advise: forget Hawkeye, switch to RunCam :-)

george7n 23/03/2021
0
Comments (3)

Q: What is the minimum distance to fly? ؟

Asked by xi6qox on 2021-09-08 03:26:20

george7n this has an SPI on board receiver....the distance is around 200m - however it can be less when obstructions (trees, buildings, etc)...you can fly this indoor, in your garden and around the house.

2021-09-09 08:10:48 Helpful (0)
Submit
Answers (1)

Q: que tipo de antena maneja ipex4?

Asked by cdavidz8a on 2021-07-01 12:50:48

george7n yes, it uses IPEX connectors

2021-09-09 08:07:25 Helpful (0)
Submit
Answers (1)

george7n I am having the same issue. I don't think that the Hawkeye brand is that great. Iam switching over to RunCam products. they are more reliable and they do what's supposed to do....so this Hawkeye product is my last Hawkeye product.

2021-09-09 08:06:39 Helpful (1)
Submit
Answers (1)

Q: frsky xm+?

Asked by BG444855495 on 2021-09-08 02:58:27

george7n YES, it supports FRSky XM+

2021-09-09 08:04:37 Helpful (0)
Submit
Answers (2)