All Messages

Q: Does this work on Bicycle

Asked by BG544310844 on 2020-10-17 06:40:07

bullshit You need a control board (like Arduion or raspberryPi), a flight controller or similiar. whatever you put the thing on doesn't matter.

2020-10-19 07:44:25 Helpful (1)
Submit
Answers (2)

Q: Does this OSD board work with Runcam?

Asked by bullshit on 2020-09-10 05:03:44

Z_itriix no.

2020-09-29 03:42:20 Helpful (0)
Submit
Answers (1)

Q: does this have a plug or solder pads for the receiver? I have r9 slim+

Asked by Joel Meadows on 2020-08-05 12:10:25

bullshit Mine had a plug but if you want to solder that shouldn't be a problem. The solder pads are quite small but you could probably solve it.

2020-08-11 05:04:53 Helpful (0)
Submit
Answers (1)

Q: Can I use a 4s 850mah battery for the Diatone TMC?

Asked by tech5960 on 2020-04-17 12:37:34

bullshit I use some unbranded china 4s 850mAh. I get around 4 to 5 min of flying.

2020-08-11 05:01:28 Helpful (0)
Submit
Answers (2)

Q: Which prop guard can be used?

Asked by Samuel Lim on 2019-08-08 08:03:10

bullshit airbladeuav offers mounts for prop guards. Google prop guars intrepid v2 3 inch and you'll see a post on facebook where you can download the files to 3D print the guards. You can also buy them online.

2020-08-11 04:59:21 Helpful (0)
Submit
Answers (1)

Q: where is it possible to found spare parts and spare frame?

Asked by Lorenzo Frigerio on 2020-05-21 04:04:32

bullshit The frame is cheapest at Airblade. Search for "Airblade Intrepid 3", you'll need the pro version because of the 12mm mounting holes for the motors.The motors, FC, ESC and camera can be bought on Banggod or most other online RC shops. The VTx is a TBS unify pro micro (I think?) which togheter with the TBS antenna could also be bought on stores like HbbyRC or Racedayquads.

2020-08-11 04:57:23 Helpful (0)
Submit
Answers (2)

Q: Will the Caddx Orca fit?

Asked by bullshit on 2020-07-25 11:04:06

Bombosity no you can use this one: https://sea.banggood.com/URUAV-TPU-Camera-Mount-Holder-Seat-Protective-Case-46+44+44mm-3D-Printed-for-Caddx-Dolphin-Orca-FPV-Camera-p-1587825.html?rmmds=search&ID=6157207&cur_warehouse=CN

2020-08-05 01:50:59 Helpful (0)
Submit
Answers (1)

Q: Does this work with Caddx Tarsier 4K Split version 1.1?

Asked by bullshit on 2020-07-03 12:33:08

Fancywork Suitable for Caddx Tarsier 4K

2020-08-04 04:20:55 Helpful (0)
Submit
Answers (1)

Q: does it fit the caddx orca?

Asked by bullshit on 2020-07-26 07:59:17

Vivi no

2020-08-03 03:44:32 Helpful (0)
Submit
Answers (1)

Q: Does this

Asked by DJCccccc on 2020-06-12 04:37:35

bullshit probably

2020-07-26 09:06:14 Helpful (0)
Submit
Answers (9)