ArcherFPV
Q: How do I change video settings there is nowhere to plug a joystick in . I have kingkong 130
Asked by ivorlamont on 2019-08-15 11:42:48
ArcherFPV definitely looks like a M12 in the photo. the 2.8mm is the aperture size not the lens thread size
2022-10-19 08:57:01 Helpful (0)Q: will this work with fat shark attitude v4 anniversary edition?
Asked by ArcherFPV on 2018-05-09 03:55:17
JohnHutch Yes it does.
2022-02-25 08:42:03 Helpful (0)
ArcherFPV The board can handle 2s however the motors can not. It’s only a 5a esc on the board and the motors are 19,000kv. Too hot for 2s without a throttle cap.
2021-01-22 07:57:39 Helpful (1)Q: Can these run on 5s without hot motors? (Using 2500 KV)
Asked by BG371213333 on 2020-12-08 11:56:58
ArcherFPV Yes you can. Just watch your PID settings, maybe lower P and D if motors get hot or put a small throttle cap on.
2021-01-10 07:09:03 Helpful (0)Q: Can I use Sunnysky ***** kv with 30A Simonk ESC on the XL7?
Asked by Jester on 2020-09-21 07:31:49
ArcherFPV You can but I would consider upgrading esc’s soon. For the xl7 build I’m working on I’m using a Flightone H7 flight controller and a hobbywing 60a 4n1 esc. For motors either going to use the brotherhobby 2510 1280kv (5s lipo to match DRL’s racer 4 set up but of course 6s to really push speed.) I’m Also thinking of trying the new emax eco 2 2807’s. The 2212 motors tho will work and work well on a 7” setup but they are dated and may be heavier than newer motors. But personally I would run what I got to start then upgrade from there.
2021-01-03 04:26:00 Helpful (0)
ArcherFPV On newer motors and setup the nut direction doesn’t matter as much as it did back in 2016-17. The older motors like on the 220s yes it mattered. 98% of all bins and fly quads these days only have one direction nuts on the motors. In 3 years of full throttle racing I haven’t lost a nut.
2020-12-18 12:28:04 Helpful (2)
ArcherFPV The shaft diameter means the internal diameter. The shaft on the outside of the motor is a standard shaft for props with 5mm holes.
2020-02-15 11:19:45 Helpful (0)Q: are the wires presoldered onto the camera?
Asked by ArcherFPV on 2019-12-16 09:52:16
Waits yes,it is the wired version
2019-12-25 03:57:25 Helpful (0)
ArcherFPV Was just about to say the same thing. Now if this one was customized just a little bit with a couple ventilation holes and maybe some connections like a xt60 and xt30 to plug in thru the box to charge a Lipo while it’s in the box would be pretty cool and possibly worth the $47 price.
2019-11-29 12:15:19 Helpful (0)
Q: Big price.... :( What are the technical characteristics? What accessories?
Asked by Multisoft on 2018-08-13 06:08:30
ArcherFPV Diatone is known for quality quads. The price is actually low to me especially for a 6s capable quad. Most 6s builds can range from $250-$500 or higher.
2018-08-29 04:55:20 Helpful (0)Q: How much does this frame weight?
Asked by Fabian FD. on 2018-06-11 08:06:28
ArcherFPV 50g seems way too heavy for a 2.5” should be around 25g
2018-08-29 04:51:41 Helpful (0)
Q: does this come with the foam battery pad?
Asked by ArcherFPV on 2018-06-19 12:00:04
wangshuinong it doesn't come with foam battery pad.
2018-07-05 01:38:06 Helpful (0)Q: will this case fit the arrow micro v2?
Asked by ArcherFPV on 2018-05-18 06:00:35
Pilgrim yes,it is compatible
2018-06-02 02:12:47 Helpful (0)Q: there are 3 different frames pictured!
Asked by xanuser on 2018-05-10 10:51:37
ArcherFPV It looks like 3 different top plates but same bottom plate
2018-05-10 04:31:19 Helpful (0)
Chymiferous No, what you got just like the photo showed.
2018-05-24 02:16:12 Helpful (0)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
ArcherFPV you can't change the settings on this camera
2022-10-19 08:57:19 Helpful (0)