All Messages

dennisglanby Yes, this one includes a "compass" (magnetometer). Communication with magnetometer is over I²C bus. GPS communications is over standard Serial (Rx Tx).

2021-03-16 10:12:52 Helpful (0)
Submit
Answers (1)

Q: Need crimping tool. Can you recommend please?

Asked by Qcheck314 on 2021-03-16 09:47:06

dennisglanby I use the IWS-2820M. Works great.

2021-03-16 10:08:58 Helpful (1)
Submit
Answers (2)

Q: does this include the blue heatsinks?

Asked by BG184817145 on 2021-02-06 04:24:06

dennisglanby Yes. Mine also came with a small dupont cable and a screwdriver for each one.

2021-03-03 08:40:47 Helpful (0)
Submit
Answers (1)

dennisglanby@BG153618831 I recommend the Iwiss IWS-2820M. It's a good tool for most small crimps.

BG221815222 29/10/2020
0
Comments (2)

Q: Does this come with the cable?

Asked by boovy2000 on 2020-12-27 05:10:51

dennisglanby Yes it does. About 20cm long. Dupont connectors at the other end.

2020-12-27 06:03:08 Helpful (0)
Submit
Answers (4)

Q: Can it be used in a protoboard?

Asked by fernandogyotoku on 2020-07-11 02:35:59

dennisglanby Yes they can. They are double spacing though. They will block other standard (2,54mm) pinholes under and around it but will fit the standard hole pattern.

2020-07-11 04:56:06 Helpful (0)
Submit
Answers (8)

Q: Will these tips work on TS100 solder? Thank you

Asked by BG637342347 on 2020-06-18 05:16:26

dennisglanby Yes they do.

2020-06-19 12:12:41 Helpful (0)
Submit
Answers (7)

dennisglanby If you're using Arduino IDE the installation is VERY simple... Go to YouTube and search for "installing esp32 arduino IDE"..

2020-02-07 04:25:10 Helpful (0)
Submit
Answers (5)