heliharris
Q: does these blades fit my tinyhawk2 freestyle *****kv motors?
Asked by BG473454494 on 2021-12-29 11:00:32
heliharris Probably... But really meant to be for ducted fan use.... I would use the Avan rush 2.5inch 3 blade prop.
2021-12-29 11:23:36 Helpful (0)Q: Will this work with a Hero Session 5 ?
Asked by davidsaintonge on 2021-12-06 06:30:05
heliharris Yes... It has a USB C male charging connector.. So will plug straight into the Hero 5.
2021-12-06 02:00:38 Helpful (1)Q: Does anybody know what type and size are the cable plugs for these units.
Asked by heliharris on 2021-02-02 05:42:34
scooter most likely it is a jst-sh connector - 3pin 1.0mm pitch
2021-07-05 01:31:47 Helpful (0)
heliharris It's identical to the one that's factory fitted to your goggles. By fitting another one to the spare port... It should improve performance.
2021-06-22 07:40:55 Helpful (2)
heliharris Female XT60
2021-06-14 06:57:17 Helpful (1)Q: Can the 6S version run on a 4S 1500mah battery without any problems?
Asked by BG434952426 on 2021-05-27 01:09:40
heliharris Yes without issue... Just a slight loss of performance and increase in noise level due to motors spinning quicker. Be warned.. this Taycan flies well but is extremely noisy and will attract attention anywhere its flown.
2021-05-27 01:31:11 Helpful (0)
heliharris It happens on many products they sell...Why is the DJI FPV DRONE COMBO not available from China to the UK.
2021-04-15 12:41:07 Helpful (0)
heliharris It's Analog but not HD..
2021-03-24 02:32:52 Helpful (0)Q: Can I also put this on my VTX? Or do I need a different type of antenna?
Asked by tonyclarkinengland on 2021-02-04 04:31:19
heliharris Not likely .... It's probably not an SMA fitting and also require a short length of lead to fit to your VTX. You will need an antenna with a fitting plug to suit your VTX... Check out your VTX specs and it should show the fitting required... There will be plenty available once you find out which type of fitting you require. Both TX and RX both require the same polarity (Right... most common or Left)
2021-02-04 04:46:40 Helpful (1)Q: does it come with a cable / wires?
Asked by koffie on 2021-01-23 04:55:49
heliharris Does anybody know what type and size cable plug is used for these Finder units.
2021-02-02 05:40:17 Helpful (0)Q: Do i need two of these... One for each lens... Or just one for the 4k camera.
Asked by heliharris on 2020-01-29 03:36:19
NZN222 You need 2 lenses for the tarsier, but the are not the same. The HD is different then then the FPV. Although they will work, they are V1 not V2.
2020-04-11 04:46:38 Helpful (0)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
