Customer Reviews

4.97 out of 5
Write a Review
  • All Reviews (31)
  • Image (4)
  • Video (0)
  • All Star
    • All Star(31)
    • 5 Star(30)
    • 4 Star(1)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
Show Original

A part of the review has been auto-translated.

  • 07/10/2020

    15w is the power of consumption, the optical power is 3.5w. But the product works perfectly.

    Comments (2)
    Show Original
  • 29/04/2021

    42 tl customs duty output adapter not working broken.cargo and laser good

    Comments (2)
    Show Original
  • 01/03/2021

    Everything is fine.

    Show Original
  • 14/12/2020

    Arrived safely but will be several weeks before I can test it out

    Show Original
  • 12/01/2021

    very happy with this unit , it's 4.5w power , 15w is the electrical draw, it comes with no instructions , I have fitted to an uno cnc shield , use the supplied power adaptor , I did not use module ,I cut the jack plug off wired to the red and black wires from the laser, I wired the white wire to the power management + pin from the uno and connected the - pin from the uno power management to the black wire of the power adaptor. works great and fan runs all the time

    Comments (1)
    Show Original
  • 06/10/2020

    Works better than I expected, burnt through 3mm plywood no problem. The button switch seems a bit of a mystery, the laser is on till you press the momentary contact, so you have to hold it to keep the laser off. So I removed the white wire, and replaced it with the PWM wire from my controller, and it now performs as I expected. If it has a fair life span, I would buy another when it eventually gives up.

    Comments (2)
    Show Original
  • 22/12/2020

    The laser module arrived within 2 weeks of ordering from China so thumbs up to Banggood. There are no instructions on how to interface to a CNC controller and the supplied psu/interface board keeps the laser switched on full power unless you keep the button pressed which seems a bit crazy. A 3A 12v power plug supply is included but has two adaptors in order to plug into a UK socket which is not impressive or possibly unsafe. Although sold as a Vigotec module, the wiring connectors were not compatible with a Vigotec controller I have available. Wiring idents on the supplied board enabled me to easily re-wire the unit to my Arduino CNC shield and the blue wire ignored as I don't monitor temperature. Its early days and I need to refine focussing but it did cut 3mm plywood with 4 passes at 100% and 250mm/min feed and air assist which is much better than my 5w unit. So, I am pretty pleased so far.

    Show Original
  • 02/04/2021

    The product seems and has the functions exactly as described in the advertisement. It has arrived in a well packed, solid package earlier than expected.

    Show Original
  • 02/01/2021

    I arrive on the indicated date. It comes in a cardboard box, without any internal protection, in the box as is. Perfect operation, at least for the time being. I have cut 3.6mm plywood in 4 strokes without problem (250 mm/m 95% power) I hope it will continue like this for a long time. Recommended.

    Show Original
  • 09/03/2021

    There is no Technical Parameters. I think TTL/PWM is 12V. and cannot drive with arduino 5V. PWM. Itested the optical power. It gives 2500mW

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$49.99
    • US$10.99
    • US$49.99
    • US$10.99
    • US$10.99
    • US$37.99
    • US$29.99
    • US$30.99
    • US$43.99
    • US$40.99
    • US$23.99
    • US$52.99
    • US$92.99
    • US$199.99
    • US$33.99
    • US$35.99
    • US$12.99
    • US$107.09