Banggood

This is a ceramic NICHROME heater (as opposed to thick film ceramic heaters in other soldering irons) with a THERMOCOUPLE (voltage output) temperature sensor. So, this item will not work with H brand clone stations which use PTC (resistance output) as a sensor. Check your station specs before buying !!! The heater resistance is around 14 ohms, so the power at 24v would be around 40 watts. The wire material is a soft PVC so it does melt.

feels a bit cheapy but also is a little bit cheapy so thats ok. the conector in mine isnt metallic, its all plastic but thats fine also. realy nice bang for your buck

Item as shown and described

Now all is ok with exchanged good works fine.Produkt is as it is shown, good quality ,

Uygun fiyat kaliteli ürün daha ne olsun tamir işi yapan herken mutlaka alması lazım

Je recommande ce produit. La qualités est excellente et le service de Banggood parfait!

Ещё не проверял, но с виду то, что надо было...пятиштырьковый штеккер...у другого продавца на фото был тоже пятиштырьковый, а пришло с восьмиштырьковым...к моей станции не подошло...И да, приехало очень быстро...

The product matched the description.

is ok , good product is compatible with Welleman station

For this price I did not expect much, but unfortunately the quality of the items we received was even less than expected. The pictures on Banggood website shows two types of connectors; one with chrome-metallic housing, one with black moulded housing. We bought two irons and both had the black moulded connectors and they are really bad. The sockets in the connector are simple circular brass "pipes" with no springs and they are too wide to make reliable contact with the pins in the soldering station