Customer Reviews

4.81 out of 5
See all 117 reviews
Write a Review
  • All Reviews (117)
  • Image (26)
  • Video (0)
  • All Star
    • All Star(117)
    • 5 Star(100)
    • 4 Star(13)
    • 3 Star(3)
    • 2 Star(1)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • WTTVIP4
    FR
    11/12/2020

    Very well packed. The cardboard suffered well during transport but the foam elements protected the parts well. The editing is not very complicated, you have to look at the instructions on the Micro SD which includes a video editing, a slightly more complete instructions. The best thing is to watch the videos online. Very important, carefully control each element during assembly. - The amounts do not all have the same lengths. At me 1 to 2 mm difference between the 4. - Check the flatness of the top bracket - The adjustment of the rails. check the distances at the edges and check the clamping. - After mounting, check the horizontalness of the Z. I unscrewed the fasteners at the top and bottom at the mounting to tighten them with the tray mounted at the top and descended at the bottom to have no forcing point and a good horizontality. I have a firm acrylic version. This version of the panel is not planned for the Pro 2 version but the first version with the X and Y engines at the bottom on the base and not in height. There are 2 panel fasteners that cannot be mounted due to the position of the 2 motors. In the problems, the probe of the heating bed that was not working (Err3), and a fan of the head that has just released. There is a lack of quality control for this printer at Two Trees , it's a shame. yet normally they are known for the quality of the products.. The studs are not the same length. Problem of fixing the panels. cannot print the Micro SD test without updating the firmware. 1 fan that just released after 4 hours of printing/testing. It is a very good printer, there is a bit of adjustment to make it perfect. Already a lot of tutorials on the internet and parts on thingivers to solve some problems. I recommend:-) I ordered the wifi module to add it to the Robin Nano v1.2 card and a MKS Mos to relieve the card.

    Comments
    Show Original
  • 21/06/2021

    There is good and not so good in this kit. The good: Great price. Fast delivery. Well packaged. Good quality parts. Not so good: The mains power cable, inside the base, was damaged. There are no instructions for the acrylic case. The side panels need the clips to be modified to fit. the screws for the hinges are not button headed, I used my own. The printer is well made, sturdy and prints out of the box. The latest firmware is on the TwoTrees website and I would recommend you update it. All in all, a great little printer.

    Comments
    Show Original
  • 23/12/2020

    A bit more difficult to build up you have to take your time but in the rough and whole a horny part. And hir and da kleine man still has to accept small mistakes of Two Trees.

    Comments
    Show Original
  • 15/12/2020

    I went to pick up today,finally have to put it together and test it,but I advise,it's going to be my first time and I'm on very high stakes it's going to be fascinating

    Comments
    Show Original
  • 14/05/2021

    Perfect, efficient, reliable, fast. Assembly done in about 3 hours, the first prints the classic 20x20x20 cube, precise. Arrived in a super satisfied workweek!

    Comments
    Show Original
  • 23/04/2021

    I really like this printer, the quality of the parts the silent drivers, the high quality linear rails, robust construction. 5 days shipping time to Romania.

    Comments
    Show Original
  • 28/01/2021

    The printer is good and I recommend it; it arrived very fast. It worked well for about a week after the hotend cables stop to work (the temperature was unstable). The store sent to me new cables, but the time to arrive is too long. I am not using the machine because I am waiting one month to replace the piece.

    Comments
    Show Original
  • 26/08/2021

    Everything is ok. Not the easiest printer to assembly but YouTube gave an extra help. It's working!

    Comments
    Show Original
  • 16/05/2021

    my first corexy, seems a lot of the issues from the first reviews have been resolved. included enclosure seems like an afterthought, mounts don’t fit where they should, so printed my own, hence 4 star

    Comments
    Show Original
  • 18/04/2021

    Super equipment. Very well packaged and express arrived!

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$399.00
    • US$206.00
    • US$189.99
    • US$469.99
    • US$299.00
    • US$279.99
    • US$579.00
    • US$239.99
    • US$379.99
    • US$299.00
    • US$3.99
    • US$259.00
    • US$8.66
    • US$2.99
    • US$42.99
    • US$19.99
    • US$2.69
    • US$20.99