Banggood

Good working as expected. Gets hot at Vref of 1v had to lower down to 0.8v. sufficient torque to push filament.

Very good

These are great motors and I'll use them for lightweight direct 3d printer extruders. These DO NOT deliver enough torque to use for pushing difficult materials with the BMG extruder clones. For that, I'm using the 40mm deep Creality motors after trying and failing with this one. I would recommend this purchase to anyone who will not be printing with abrasive materials. I have tried using it with BASF PAHT CF15 which is a high temperature nylon/carbon fiber filament along with a Microswiss 0.8mm nozzle. This material should have pushed through easily. It really did not. This motor just choked.

looks good, have to write here to leave a bad review for another part. so here is a dislike for this system. I should be to review individual parts of my order.

Not yet installed on my printer (extruder motor) but seems smooth on rotation. Good ! Was delivered with a one meter cable length.

ok

Great looks, to be tested

Good quality pancake stepper

funktiuoniert ganz gut. mit guten steppern auch schön leise

objeto entregue dentro das expectativas ,boa qualidade