T-Motor F1507 1507 2700KV 3-6S / 3800KV 3-4S Brushless Motor for Cinewhoop RC Drone FPV Racing
A part of the review has been auto-translated.
I replaced the geprc 1408 of my cinewhoop reptile cloud 149, because they were heating up, with these engines. I'm very happy, they're heating normally and have a lot more recovery than the 1408. I did 2 4s in 1500mah and they held the 5 minutes. I definitely recommend these motors for a cinewhoop 3 inches.
Excellent build quality. It comes with two lengths of M2 screws, a prop nut, spare c clip and brass spacer. Also comes with a set of cool stickers.
Order received
Very smooth and powerful little motor. Comes down pretty hot though on 6S. It comes with two lengths of M2 screws, a prop nut, spare c clip and brass spacer. Also comes with a set of cool stickers.
EXcellent motors thankyou AAA+++
Engine purchased for spare. They're really perfect. I mounted them in a 149 cloud reptile. They don't heat at all despite the weight of the cinewhoop with the sports camera. I advise them.
pretty expensive
I use them with a Shendrone Squirt V2.1 and both in size and power they go like a ring to the finger, you see well finished engines and very smooth when flying. What I do notice is that despite playing with the filtering of RPMs, they tend to get hotter than others, it's not much of an exaggeration but I was a little surprised.
Great engines
All good ! Banggood !