Switching Power Supply AC85-265V To 12V 1A 12W For LED Strip Light
Ho preso questo buon trasformatore per alimentare una striscia a led. Funziona tutto bene e il calore viene dissipato correttamente. Lo consiglio.
Соответствие заявленным параметрам. Качественная сборка и компоненты.
Nice finish, small size, good quality for a few bucks! Highly recommended product! Szép kidolgozás, kis méret, jó minőség, olcsón! Ajánlom mindekinek!
Works well, but the top part does not fit properly.
ottimo prodotto
Hienosti toimiva virtalähde vaikka led nauhalle.
The product appears to be well constructed. I have tested this power supply with a 5 meter LED strip which draws over 800ma. The metal housing gets warm to the touch but no hot. The screw driver slot in the case above the output terminal is slightly misaligned. The screwdriver must be held at an angle to access the negative (-) terminal screw. This misalignment does not prevent tightening the screw. Both ends of the housing are open. Safe installation should be considered to assure no contact with internal components.
SKU136055 works perfectly with the 4W 48 LED COB LED Chip (SKU175597). I put SKU136055 in White Plastic Waterproof Electronic Case PCB Box 100x68x50mm (SKU 162286). The driver stays cool after several hours of work and also the LED stays cool and does not require heat sink. Thanks BANGGOOD!
Parfait. Réglage pour ajuster la tension. Attention, courant limité à 1A, au dessus disjoncte et se réenclenche automatiquement ce qui produit un clignotement.
Функцию выполняет, корпус хлипковат. С клеммами надо быть осторожным, можно повредить при сильном завинчивании.