Customer Reviews

4.94 out of 5
See all 321 reviews
Write a Review
  • All Reviews (321)
  • Image (40)
  • Video (0)
  • All Star
    • All Star(321)
    • 5 Star(304)
    • 4 Star(15)
    • 3 Star(2)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 24/02/2020

    The unit arrived well packaged & protected. No rust issues, but I did have to clean a decent amount of oil & a bit more machine fouling than I believe should be acceptable on any type of part being labeled precision. The chuck mounted up to my existing Little Machine Shop adapter plate. The first item i tossed in the chuck was a piece of 6mm Brass Round Bar & with not much effort I was able to have it centered to 0.0005" My only complaint is 2 of the 4 chuck jaws were not completely machined & they stopped short of completely facing off the face of the jaws. Pictures included will show the facing issue which I will turn & Face again on my own. At this point it is a product I would definitely purchase again in the future.

    Comments
    Show Original
  • 12/02/2020

    Real product is way BETTER than displayed one. I ordered 100mm size. Very well machined. But mounting (back) side is different, than on photos - 4 holes 90 deg instead of 3holes 60 deg.

    Comments
    Show Original
  • 24/09/2018

    These Sanou chucks are absolutely excellent value for money. They are made of high quality cast iron with hardened jaws which are excellent for holding all types of machinable steels. They have high precision made components, operate smoothly and brilliant finishes. Great for both manual lathes and CNC machines. I have bought several different Sanou chucks now and I am sticking to this brand because they are so good. Recomended in every way!

    Comments
    Show Original
  • 07/09/2020

    I enjoyed it quite and would recommend it. it is possible to achieve 0 centth beat with patience. Only problem is that the front face of the chestnuts have not been rectified correctly as there is difference between the 4. Mine is 80mm, perfect for small pieces

    Comments (1)
    Show Original
  • 13/07/2021

    San Ou K72-80.80mm OD body metric independent 4-jaw chuck(not a 3" chuck (3" = 76.2mm).Mounted on Boxford lathe.Well finished tool compliant to its recommended purpose( holding of non-ferrous metals and softer materials eg: aluminium,plastic,wood etc.) Clamps ferrous metal work pieces adequately,however,risk of slippage of the workpiece being turned may result in shearing damage on the jaw holding faces.Do so at your own discretion.Note that the 80mm chuck (K72-80) has a 3 point /3 screw mounting pattern as shown in the photographs.A separate chuck adapter may have to be purchased or fabricated to suit your particular lathe.Mounting boss/flange is 55mm diameter x 4 mm height,3 screw mounting pattern at 120º from each one another.Recommended item.

    Comments
    Show Original
  • 30/12/2020

    Excellent product. Even better than described: The tightening tool has a security spring preventing the tool to be left on the chuck. I had done that on my previous 3/4 jaws to prevent accidents. The quality is very good, it gives an overall impression of serious construction and the run-out is ok for such a small machine accessory. Note that the Alen screws cannot be used on Chinese mini lathe, you need to prepare 6 mm x 30 studs as shown.

    Comments (1)
    Show Original
  • 17/10/2019

    as always very well made !

    Comments (2)
    Show Original
  • 24/01/2018

    Vema sam zadovoljan kako je napravljen sobzirom na cenu od 78.27 evra sa raznim popustima. Very satisfied

    Comments
    Show Original
  • 05/06/2020

    The quality and design looks perfect.

    Comments
    Show Original
  • 24/04/2020

    Good.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$104.99
    • US$10.99
    • US$7.99
    • US$12.99
    • US$19.99
    • US$13.99
    • US$43.99
    • US$6.99
    • US$9.54
    • US$19.89
    • US$17.19
    • US$6.99
    • US$37.99
    • US$11.99
    • US$20.98
    • US$4.00
    • US$16.49
    • US$7.49