Customer Reviews

4.9 out of 5
Write a Review
  • All Reviews (48)
  • Image (7)
  • Video (0)
  • All Star
    • All Star(48)
    • 5 Star(43)
    • 4 Star(5)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
  • April-22 2017 21:13:23

    This frame came with a lot of goodies like the LED board and PDB which is cool. The GoPro mount is cool and the tiered arm style leads to way less propwash and overall turbulence when flying in general. Ultimately, some problem I ran into were: - There is not enough vertical height to stack 3 board with the stock standoffs included with my 4-in-one ESC board, OMNIBUS flight controller, and this frame; the standoffs had to be cut the clear the top of the frame. So, with ESCs and FC, there is no room

    Comments (1)
  • November-30 2016 20:45:42

    First off there were no instructions whatsoever in the frame kit. I assembled it by looking at the pictures on the Banggood site. I'm currently not able to complete the assembly because the flat plate doesn't fit into the 'L' brackets. This is nothing a little sandpaper or a file won't cure. The FPV camera verticle pieces are a tight squeeze put they pop into the top plate with just the right bit of force. These plates don't actually secure to the frame other than their friction fit. The

    Comments (2)
  • July-08 2017 05:54:32

    Produit conforme a la description du site.Reçu dans une boite carton qui protège fort bien l'ensemble. Carbone de bonne qualité en 4mm d' épaisseur, Frame très bien découpée. Tout est fourni , vis , PCB et sangle de batterie.Chez Realacc , ils n'ont pas été radin,il y a beaucoup plus de vis que prévu. Seul bémol , il manque une notice de montage mais grâce aux photos de Bang good présentant en image la Frame , j ai pu l' assembler facilement. Je la recommande pour sa qualité, pour les

    Comments
  • May-27 2017 16:09:11

    The frame itself is quite tight. So because i did not have a 5V regulator handy I had to fit 3,5 tiers into one stack (the ,5 is the receiver). And that required some customization. I ended up using a one tall M3 bolt for each of the four stack corners along with various spacers to save as much space as was needed. The two front bots had to be cut down to fit under the FPV Camera angle mount. https://youtu.be/TRk6mpQN9lg Took a while to get it all sorted, but it flies fine now :) Wold recommend

    Comments (1)
  • SegVIP2
    GB
    May-03 2017 16:06:36

    I really like this frame. Tricky to put together with all components for a noob, but got there. No instructions came with the package, but I knew this based on other reviews. It wasn't hard to work out where everything went. Would definately recommend.

    Comments
  • February-03 2019 06:44:06

    Realacc Pheonix 210s carbon fiber racing frame, awesome looking and easy to put together. Price was great also! Highly recommend!! ;

    Comments
  • June-02 2018 11:53:13

    Seems hard to build, but It would be happy time.

    Comments
  • February-15 2017 05:17:51

    Just reveiced my package and lo and behold, they've sent me the wrong frame, haha :D I got a normal x210, instead of Phoeinx x210S. which I realy don't mind, because after I already ordered this frame, I got second toughts if this frame is really that strong. If you think, 4 standofs hold the two main plates together, I wouldn't trust that. So I'm actually happy that I got the "normal" x210. Hilariuos.

    Comments
  • May-12 2018 11:25:07

    While this frame is kind of a PITA to build it flies amazing. You really do notice a difference with the motors staggered. I have crashed the original frame a lot and have been amazed by how well it has held up. There is a weakness to this frame though and it's the thin fingers of carbon on the top plate that reach out to the front stand offs. This is where my original frame broke. I was looking to possibly buy a better design frame but for the money this is pretty hard to beat.

    Comments
  • October-12 2017 15:59:12

    Telaio abbastanza complesso da costruire, non ha poi molto spazio all'interno quindi occhio ai componenti che scegliete, una volta assemblato tutto però il risultato è ottimo, molto veloce e reattivo, curva molto bene! quindi se volete un valido telaio questo fa per voi, visto anche l'ottimo prezzo.

    Comments
Show:

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$16.05
    • US$36.99
    • US$27.99
    • US$22.99
    • US$65.82
    • US$21.41
    • US$20.95
    • US$15.99
    • US$26.88
    • US$27.51
    • US$30.42
    • US$123.41
    • US$32.77
    • US$47.67
    • US$5.07
    • US$57.92
    • US$12.59
    • US$15.99