Customer Reviews

4.79 out of 5
See all 376 reviews
Write a Review
  • All Reviews (376)
  • Image (92)
  • Video (1)
  • All Star
    • All Star(376)
    • 5 Star(341)
    • 4 Star(18)
    • 3 Star(2)
    • 2 Star(3)
    • 1 Star(12)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 05/09/2021

    Software used: LaserGRBL I bought WAINLUX® New K6 3000mW ⇒ ATOMSTACK A5 30W ⇒ ATOMSTACK A5 PRO 40W and tried it. The instruction manual is not available in Japanese, but it can be easily assembled while looking at the picture! Weight also PRO is designed to be quite lighter and easier to carry than other ATOMSTACK series Not only ceramics and leather goods, but also stainless steel and other metals can be easily sculpted if you paint the carving surface black in advance! There are also special metal engraving paints which are expensive and can be replaced by oily and water-based pens(^^)b [Precautions] It's better to try carving into thin metal by gradually increasing the setting (metal may distort!) ・When carving, lay a solid mat under it. (When carving cardboard or wood, it may pass through due to misconfiguration.) Soot is generated when carving wood, so it is good to install a fan or work with a small fan ・Working in the room causes soot to flutter, and everything in the room is covered with soot (^^; · The wood must be set according to the type of tree, or it will be finished Although focusing is not required, the focal length of the sculpture on a curved sphere is changed without using dedicated parts, so uneven burning occurs when finished.

    Comments (9)
    Show Original
  • 02/02/2022

    Very good product, nicely packaged. Even though the box was damaged in transport all parts were intact. It's very powerful laser, it cut 4mm ply in one pass at 200mm like butter leaving straight edges for perfect assembly. Also very good for engraving and etching. You can etch glass easily in one pass, I just did a quick test on glass. I'm very pleased with this laser, all recommendation.

    Comments (3)
    Show Original
  • 14/12/2021

    Top shipping and service, Quality products, only small problem the cables often hang the parts to be engraved when the direction changes are fast or frequent, the swinging brings them to the level of the various parts of the machine or parts to be engraved, to avoid this I put a 35x20 rail and put a 10x20 R28 Carrier chain on both axes, I use it with Light burn ,I extend 200 mm with a 2020 V profile of machifit, therefore 600mm in length-height X axis and 410mm for width Y axis in Lighburn and Win 7; the setup of the program and easy when Windows has all the updates, otherwise, switching COM ports to find; ordering the LASER fails. Too bad the A10 pro is only coming out now!

    Comments (2)
    Show Original
  • 24/11/2021

    Good car. It cuts and cuts quickly and accurately. Mounting instructions in my opinion not so clear (but easy to guess).Very sturdy and stable. I suggest to put a layer of wood under it as a base and then make up with iron honeycomb foil for cutting. (at least you can see the laser when you punch wood or other material). Very happy with the purchase.

    Comments (2)
    Show Original
  • 09/09/2021

    Shipping was fast and the engraver actually arrived a day early. The engraver was packaged very well, and assembly & set-up was easy and pretty straight forward. I have engraved multiple random images on some scrap wood that I had, as well as some painted stainless steel tumblers using the R3 roller attachment. Look-up recommended speeds and power levels for what type of material you are engraving to get off to a decent start. My first 2 engravings were a little off, but I have since got them dialed in a little closer. I highly recommend this unit for anyone who is considering one of these types of laser! You really can't go wrong for the price of one of these!

    Comments (2)
    Show Original
  • 26/03/2022

    It took a week and 10 days for the laser to reach me, and the cargo arrived well and well. Cutting tests: I tested with the wood that comes with it, the cut is good, the pattern on fabric and the photo embroidery is fine, it doesn't cut white felt. He can write after painting over a knife. the material quality of the product is good to install, the booklet is sufficiently explainable. The product is good quality if you intend to buy it, but the laser power is insufficient to cut thick wood.

    Comments
    Show Original
  • 19/11/2021

    🇦🇺🙂 G'DAY from Australia just unpacked box it was packed really no damage Australian power adapter was included ty for that great detailed instruction manual looks very easy to put together apparently 30min to assemble but I have no feeling in my hands from nerve damage from peripheral neuropathy but I still can do it easy as 🇦🇺🇦🇺🐨🦘🇦🇺🇦🇺🙂

    Comments
    Show Original
  • 07/09/2021

    product is quite successful. a machine that can meet most of my expectations. And the installation is quite simple. It's been about three months since I've had it, I've had no trouble. even though I'm tired

    Comments (17)
    Show Original
  • 04/11/2021

    The product reached me in a week despite the pandemic conditions. Thank you very, very much to Bangood employees for preparing such a product. I recommend it to anyone who wants to buy Atomstack A5 Pro. Love and Greetings.

    Comments (1)
    Show Original
  • 17/09/2021

    Thank you. Im really happy with the laser. No problems with shipping. Aramex did a great job in delivering my unit. Thank you to all.👍🏻👍🏻😃😃😃.

    Comments (1)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$269.00
    • US$199.99
    • US$179.99
    • US$499.00
    • US$299.99
    • US$503.49
    • US$279.99
    • US$349.99
    • US$1,099.99
    • US$199.99