Customer Reviews

4.88 out of 5
See all 33 reviews
Write a Review
  • All Reviews (33)
  • Image (9)
  • Video (0)
  • All Star
    • All Star(33)
    • 5 Star(29)
    • 4 Star(4)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 11/01/2022

    Software used: LaserGRBL WAINLUX® New K6 3000mW ⇒ ATOMSTACK A5 30W ⇒ ATOMSTACK A5 PRO 40W ⇒ ATOMSTACK A5 PRO +40W I bought it and tried it. The instruction manual is not available in Japanese, but it is easy to assemble while looking at the picture! The weight of the PRO and PRO+ is also lightweight and is lighter and easier to carry than other ATOMSTACK series. You can easily engrave ceramics, leather goods, and metals such as stainless steel! Material that is difficult to engrave is made possible by painting the engraving surface black in advance. (There is also a special metal engraving paint, which can be replaced by an oily or water-based pen.)[Note] ・Because it has high power, it is better to gradually increase the setting to engrave into thin metal (metal may distort!) ) When carving wood or leather products, it is recommended to install a fan or a small fan to work while constantly flying. ・When carving wood or leather products, it may pass through with a set mistake. ・When carving wood or leather products, soot is generated. ・It is recommended to work while always flying with a fan or a small fan. When you work indoors, soot will flutter, and everything in the room will be covered with soot (^^; ・The wood will be finished if you don't change the setting depending on the type of wood. ・The focus adjustment is not necessary, but the sculpture into a curved sphere without using dedicated parts changes the focal length, so it is completed. Sometimes the roasting is uneven.

    Comments (1)
    Show Original
  • 01/01/2022

    Let me first mention that there are two flaws that I have noticed so far, the instructions don't tell you how much to tention the belts and wheels (turns out it's less than I thought) amd the end stops on the bottom of the y axis are not positioned correctly. Aside from that, however, this laser is amazing! The unboxing experience was great, because every piece was packaged neatly and safely, with foam around and between everything. Furthermore, assembly was like building a lego set. Every step has its own bag with all the bits for that step, all the parts fit together nicely, the instructions were surprisingly good and all the necessary tools were provided. The laser works great the second you assemble it, with very good precision and surprising power. It might be worth mentioning that the colour is more purple in real life than the photos. Don't expect to be cutting much more than 6mm, at least not without air assist which I highly recommend. I find that the laser module should be almost touching the workpiece for best results.

    Comments
    Show Original
  • 04/01/2022

    Excellent laser cutter/ engraver. Easily assembled in 30 minutes. Tested with Laser RGBL; cuts 3 mm. light plywood in 4 passes @ 100% power. Extremely neat cut. Solid and stable frame, high quality assembling and finishing. Highly recommended; it fully worths the price.

    Comments
    Show Original
  • 24/01/2022

    The power of the laser is lower than that indicated in the specifications, for that there is the A5 that has the power of 5W is much more economical. It happened to me and I have claimed it.

    Comments
    Show Original
  • 17/01/2022

    delivered fast. perfect packing. not eu socket cable, but working well with standard eu pc cable. i will write more after test. thank you.

    Comments
    Show Original
  • 04/01/2022

    kvalitná konštrukcia, dobre zabalené, žiadne poškodenie,dobrý návod... ešte som neskúšal ako pracuje samotný laser.

    Comments
    Show Original
  • 14/01/2022

    Everything's working properly.

    Comments
    Show Original
  • 18/01/2022

    very good ! thanks 👍

    Comments
    Show Original
  • 31/12/2021

    tutto perfetto

    Comments
    Show Original
  • 22/12/2021

    Very good laser engraver. I fully recommend Lightburn software instead of LaserGRBL. Laser is strong, parameters of laser are true. One negative thing is that the engraver hasn't limit switches (endstops). It means that it is not possible to GO HOME position. It means that laser head can crash into the frame. Sorry, give 4 stars but only for this reason. Because two limit switches cost $2 and overall impression would be much better.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$349.99
    • US$649.99
    • US$279.99
    • US$309.99
    • US$99.99
    • US$199.99
    • US$329.99
    • US$229.99
    • US$349.99
    • US$69.99