Customer Reviews

4.93 out of 5
See all 1009 reviews
Write a Review
  • All Reviews (1009)
  • Image (89)
  • Video (5)
  • All Star
    • All Star(1009)
    • 5 Star(959)
    • 4 Star(39)
    • 3 Star(6)
    • 2 Star(3)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 10/11/2016

    Have these fitted to a small adjustment on my emco unimat sl. See picture

    Comments (11)
    Show Original
  • 05/09/2021

    The package arrived in 10 days, track number tracked. The packaging is slightly creased, probably because of the speed, but inside the whole, and it's not easy to break. The cutter was ordered for the JET BD-7 machine, in which cutters of 8x8 mm are installed from the factory, which is very small. All my 10x10 and 12x12 incisors with common types of interchangeable plates. In general, the new incisor not only solves the question of setting the incisors strictly in the center, but also extends the range of sizes to be set. 10х10 becomes with reserve in height, can and higher and lower. And here's 12x12 in the nail. No lower, the tape falls on the base, and no higher point. I am satisfied with the purchase, working on the machine has become a little more convenient and relaxing. Thank you!

    Comments
    Show Original
  • 04/10/2016

    estupendo el producto, muy bien presentado, es genial y a muy buen precio

    Comments
    Show Original
  • MCNVIP2
    IT
    16/04/2017

    Ad un prezzo inferiore del 50% rispetto a quanto ho trovato in giro mi è arrivata questa bella testa per cambio rapido degli utensili, bella a vedersi ed efficente. Ci sono 4 holder, 2 per utensili normali con gambo fino a 12mm, una per ospitare la lama di un troncatore e uno con un foro per utensile da interno con gambo da 3/8" Nella confezione c'è tutto quel che si vede in foto più una bella sorpresa: 2 utensili saldobrasati per interni. La finitura dei pezzi è buona, la testa ha qualche imperfezione come si vede nelle mie foto ma per il prezzo è ottima, il pezzo rimane correttamente bloccato. NOTA: Anche se ci sono 2 slitte per 2 holder è possibile montarne sempre e soltanto uno alla volta (ENGLISH VERSION BY GOOGLE TRANSLATE) At a lower price by 50% compared to what I found around me came this beautiful head for quick tool changes, looks better and efficient. There are 4 holder, 2 for normal tools with stem up to 12mm, one to accommodate the blade of a shearing machine and one with a hole for internal tool shank with 3/8 " In the box there is all that you see in the picture as a nice surprise: 2 brazed tools for interiors. The surface finish is good, the head has some imperfections as you can see in my photos but for the price is excellent, the piece is properly locked. NOTE: Although there are two sledges for 2 holder you can always montarne and only one at a time

    Comments
    Show Original
  • 09/01/2017

    You can fit it on the compound without much hassle. Just turn a small bushing and shorten the thinner screw that was delivered in the package by 1.5 mm. Also don't forget to order spare tool holders (SKU 1058488) because you will need those if you use more tools.. (though the 4 in the kit is a nice start!) Note that the tool is made completely out of aluminium. I recommend purchasing a second set in order to have 4 extra tool holders, 4 is not enough and it is a good idea to have a spare handle assembly. The product is accurating constructed and works very well on minilathe despite is made in aluminum. The price is very good.

    Comments
    Show Original
  • 25/06/2020

    It is an aluminium kit, do not compare it with the once in steel. No machined surfaces. .Compared to an item from the 250 series in the pictures.

    Comments
    Show Original
  • 21/04/2019

    Good quality. Works well. Tool smaller than expected. Had to make adapter to work on my lathe

    Comments
    Show Original
  • 10/04/2019

    Highly recommend vendor! Very fast shipment, good item , very good applicable. i use tool holder on a EMCO copmpact 5, that's ideal for this lathe. I am very satisfied about, thank you!

    Comments
    Show Original
  • 19/10/2016

    The bolts in the kit were not long enough for my lathe (Clarke cl500m) so i had to make a new longer bolt instead. I wish they would restock the spare tool holders as having 2 normal tool holders is not enough.

    Comments
    Show Original
  • 06/02/2016

    Сделан из очень мягкого металла, что есть большой минус. Зажимная ручка вырвалась с корнем в первый же день использования. Пришлось вытачивать большего размера, нарезать бОльшую резьбу в держателе. Сейчас более-менее держится. К съемным держателям резцов претензий нет - крепкие, но болты в них тоже мягкие, в итоге ключ начинает проворачиваться, болты - под замену.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$6.99
    • US$8.39
    • US$16.79
    • US$37.99
    • US$15.99
    • US$219.99
    • US$27.99
    • US$8.49
    • US$4.99
    • US$7.99
    • US$6.99
    • US$11.99
    • US$5.59
    • US$9.49
    • US$66.49
    • US$51.99
    • US$13.56
    • US$14.99