A part of the review has been auto-translated.
didn't tested yet, I don't have the power supply
Very well packaged, is particularly useful despite its small size for soldering or desoldering surface mount electronic components.
The heater came in good condition. Keep in mind that this was sold without the PD charger, thing that i didn't read it in first place, but is not a problem cause you can find one in the market. I tried it too an it worked perfectly. Altought is smaller than i thought, it do the job perfectly. I am very happy with this purchase.
I did not try it yet but it looks good
Super nice and useful little device. Beautiful, very well packed. Setup and usage is easy. Accuracy of temperature settings is ok (220° settings is 210° in mine). What I miss in the description and in the manual: Minimum voltage - this is 12 Volt! So the device will not work with a normal 5 Volt USB port, it needs 12 V minimum and 20 V is maximum. Highly recommended!
Good product, does the job very well. Requires 12 to 20V 1.5 to 2.5A Very good quality.
Thought I might use it as a preheater. I was pleasantly surprised when it reflowed my board with ease without melting plastic connectors. A bigger model would be great and it’s pretty slippery.
Its good and the temperature display seems accurate when it comes to wattage drain & temperatur valuee (see video) It peaks around 55watt, by PD protocol (power delivery, so you can easily run it from a PD-able powerbank (video) It will cycle the heating on & off, to maintain a given temperature value, so fx 200 dgrees it will cycle from 198* to a little over 200 and back and forward and thats very normal. it will overshot a temp-value. with a few percentages, fx 200 it will go to fx 205 and then dial it down to 200, and ideal for reaching a given value faster... its quite fast to heat up.... on my powerbank PD20v..it took 2.35m (155s) to reach 350' (max) and from 30 to 300 was a tad under 2minutes (120s) so certainly quite fast... overall' I like it.. and I needed it for overall usecases as such a mobile heating-tool with fine heating control, can come handy, for all sorts of things' or layers you wanna fuse, or simplyl to a have a sense of black temp-surface to span-lock my thermal cameras.... the build and finish is over the top, for such an item, but thats MiniWare in a nutshell... I got mine on sale.. the included TypeC cable.. is very nice.. the best TypeC silicone wire I come by, and saw no siginificant heating at 65w so can likely also do higher fx 100w... but Miniware only class it for 60watt....(will upload a video with the temperature test)
I already received the item thank you very much
good product is good quality