Customer Reviews

4.68 out of 5
See all 19 reviews
Write a Review
  • All Reviews (19)
  • Image (5)
  • Video (0)
  • All Star
    • All Star(19)
    • 5 Star(16)
    • 4 Star(2)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 10/06/2022

    Receive quickly and in good condition, packaging OK. For assembly, you must also provide a multimeter for the resistors. Indeed, the marking (4 bands of color +1 for tol) is not always clearly visible. For the pitches, the marking on the board is sometimes not very clear. Refer to the photos on the site (ok I re-wrote on see image 2). The resistors are in the tolerance range of 5% error (while the brown band = 1%). The measurement of a 1000 ohm can be 970 ohms or 1001 ohms. A measurement repeating with a precision multimeter should confirm. All electrolytic capacitors are 100uF by 16Vdc, so no need to sort them. The pads for the connection of the elements are not simple to handel for soldering. Care must be taken that the pad does not "go" to the other side while soldering. It's quite a hassle to solder. Be careful not to overheat though. NOTE: JP1 bridge must be closed (open only if there is the option for the charger)! R29 is not installed, it is normal, at least for this version. Ok, the module is working correctly: Note: point V4 is at 5V and not at 1.5V ! Warning: if a key is stuck at startup (boot), the screen remains frozen when the version is displayed. Same with COM. If the COM port is open, this blocks the start of the unit. Otherwise, the COM works fine. Note that for the coils, the value of Z is at x.xx while it is displayed at x.xxxx. Further tests need to be done. For the case: It's really tricky to install. Be careful not to over-tighten the screws or risk cracking - breaking the case (upper or/and lower plate). Be careful not to jam a key. In overall, the product is fine and good. I think the battery connector has to use (take it in account with the to case) this will make the unit autonomous.

    Comments
    Show Original
  • 31/05/2022

    The box was a bit flattened on the outside as there was no additional packaging but internally the cardboard and use of plastic bags inside the box meant that no obvious damage was done to the kit. The instructions are in black and white, not the usual color, that often comes with kits from JYETech. The instructions are clear, well written and appear easy to follow. Look forward to putting it together when I get the chance. Thanks Banggood. I have included a picture of the optional case, which was scratched on arrival but I am hoping it is only superficial and not penetrated the stick on coating.

    Comments
    Show Original
  • 22/07/2022

    I was expecting (free gift) LCR meter, yet came just the acrylic case. So be careful cause link shows the meterkit. Case is fine just a little break near the drilled hole.

    Comments
    Show Original
  • 13/07/2022

    Good LCR meter with its housing case. Easy to mount, although not for novicesas some dexterity is required. Not cheap, but worth the price!

    Comments
    Show Original
  • 11/06/2022

    Great!

    Comments
    Show Original
  • 25/07/2022

    Fast delivery of the kit; uncomplicated assembly - both soldering work and mechanical completion of the measuring instrument. When compared with an older measuring instrument of the same type, it shows identical measuring results. I find the enclosed instructions for installation and operation adequate.

    Comments
    Show Original
  • 06/06/2022

    Assembly requiring a little dexterity to make nice welds. A reminder of the color code of the resistors would not be useless, I used an ohmeter because reading the values is not very easy. Once assembled the kit works perfectly.

    Comments
    Show Original
  • 26/06/2022

    After assembly everything is fine. Well packaging, very fast shipping and delivery. Seller recommended.

    Comments
    Show Original
  • 08/06/2022

    It artived in good condition, and after soldering I tested it and it works fine! Thumbs up for this purchase

    Comments
    Show Original
  • 29/07/2022

    Okay.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$17.99
    • US$27.99
    • US$18.99
    • US$17.99
    • US$94.99
    • US$18.99
    • US$24.99
    • US$13.99
    • US$54.99
    • US$5.99
    • US$14.19
    • US$7.99
    • US$37.99
    • US$25.99
    • US$28.99
    • US$3.49
    • US$11.99
    • US$14.23