Customer Reviews

4.78 out of 5
See all 36 reviews
Write a Review
  • All Reviews (36)
  • Image (4)
  • Video (0)
  • All Star
    • All Star(36)
    • 5 Star(32)
    • 4 Star(2)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 09/12/2015

    La qualité de cette maquette déjà montée est moindre parce que le transport a tendance à tordre les éléments (tiges) et les engranages sont mal positionnés. Difficile de faire mieux cependant. The quality of this model already mounted is lower because transport tends to bend the elements (rods) and gears are badly dimensioned. Hard to beat though.

    Comments
    Show Original
  • 04/10/2016

    The item was NOT WARPPED before being put in Box. The item was allowed to slide around inside box and got DAMAGED. They wrapped the outside of Box only. Base is damaged and I have tried twice to make contact BUT NO REPLY HAS BEEN MADE. DISGUSTED COMPLETELY. BRUCE

    Comments (1)
    Show Original
  • 24/04/2018

    when rotating the main shaft gets stuck, I hope they can change it

    Comments
    Show Original
  • 11/03/2016

    This is a superb and sizable model of a 4-stroke engine wih sequentially working lights. These illustrate the principle of fuel, spark plug and exhaust as you turn the handle. It is by far the most popular gadget in my house and it is educational too! In give it 5 88888 Stars for all categories.

    Comments
    Show Original
  • 10/07/2017

    Note that you must adjust this item before it will work correctly. It is a learning tool. The cam lobes must be synchronized and timed. The contact for the lights must be adjusted to contact, and just like the cam, it must be set to the correct position. I used the contact for the red wire (spark plug) to set it. I did not like the fit of the crank pin. It was not very tight on one side. I aligned the two crank throws, and drilled them for set screws (#6) to hold the throws in alignment. I had to straighten the contact (at the screw end) to get the lights to work. You have to time it anyway, so it is no big deal. For the price, It is a very good tool. I will be using it to teach my grandson. Right now it works really well and I am very pleased with it. If you can not adjust it to work, you are not qualified to teach others. It is a great teaching tool, and I will also use it with my grand daughter in a few years. My grandson will take it to school for "show and tell".

    Comments
    Show Original
  • 15/06/2016

    As simple as you can see in the photo. But it works fine. You can turn and see how a fuel engine works.

    Comments
    Show Original
  • 09/01/2018

    A great gift for a mechanical engineer. The package arrived crushed but the model was ok.

    Comments
    Show Original
  • 14/11/2016

    Hi yes received this and its bigger than I through works ok

    Comments
    Show Original
  • 03/12/2015

    perfecto para enseñar como funciona un motor de explosión, si que es verdad que venia con un cable desconectado pero de fácil arreglo

    Comments (1)
    Show Original
  • 25/09/2019

    Little repair was needed but now it works well !

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go
    recommendation for you
    • US$139.99
    • US$10.99
    • US$68.99
    • US$28.99
    • US$20.99
    • US$27.99
    • US$19.99
    • US$20.29
    • US$8.25
    • US$76.29
    • US$38.99
    • US$6.99
    • US$34.99
    • US$11.99
    • US$102.99