Perfect, I'll be able to safely mount my V2 tart camera in my 3-inch frame.

Parfait, je vais pouvoir monter ma caméra tarsier V2 sans risque dans ma frame 3 pouces.

Perfect, I'll be able to safely mount my V2 tart camera in my 3-inch frame.

These screws allow me to apply the cam card

queste viti mi consentono l'applicazione della scheda cam

These screws allow me to apply the cam card

The easiest way to recover M2 screws and spacers that are not normally found in hardware stores! It contains 5 25mm long m2 screws, 9 spacer grommets, 15 plastic spacers and 5 plastic bolts m2

Il metodo più semplice per recuperare viti e distanziali M2 che normalmente non si trovano in ferramenta! Contiene 5 viti m2 lunghe 25mm, 9 gommini distanziatori, 15 distanziatori in plastica e 5 bulloni in plastica m2

The easiest way to recover M2 screws and spacers that are not normally found in hardware stores! It contains 5 25mm long m2 screws, 9 spacer grommets, 15 plastic spacers and 5 plastic bolts m2

part of nuts with joints:(

часть гаек с косяками :(

part of nuts with joints:(

top 👍

top 👍

top 👍

Everything you need for a toothpick frame. And way better then nylon screws.

Everything you need for a toothpick frame. And way better then nylon screws.

Everything you need for a toothpick frame. And way better then nylon screws.

fantastic set a must have for micros! toothpicks, 2.5", 3", 16/16, 20/20 essential.

fantastic set a must have for micros! toothpicks, 2.5", 3", 16/16, 20/20 essential.

fantastic set a must have for micros! toothpicks, 2.5", 3", 16/16, 20/20 essential.

it's a great kit I got two for a build and extras... quality for what I need and will need. I used the Allen bolts/screws and a bit of it will help with a dream leader 120 2nd gen build in progress!!! send it

it's a great kit I got two for a build and extras... quality for what I need and will need. I used the Allen bolts/screws and a bit of it will help with a dream leader 120 2nd gen build in progress!!! send it

it's a great kit I got two for a build and extras... quality for what I need and will need. I used the Allen bolts/screws and a bit of it will help with a dream leader 120 2nd gen build in progress!!! send it

The screws were a little ttle longer than expected but I reccomend

The screws were a little ttle longer than expected but I reccomend

The screws were a little ttle longer than expected but I reccomend

Very good screws

Très bonnes vis

Very good screws