A battery strap is not included even though the description says one is. The 3D printed pieces look to be printed out of some bad PLA and snap pretty easily. This frame is not the same size as the Mode 2 Ghost frame so 3D pieces printed for either frame will not fit the other. The Ghost uses lock nuts below each of the spacers, this frame does not. The screws go through the lower plate, arms, and directly to the spacers. The arms were not all cut the same direction from the sheet of carbon fiber. The frame does look good. There is plenty of room inside even for first time builders. If you use 2 battery straps, which should fit, your battery will have a very hard time coming out during crashes. 30.5x30.5mm and 20x20mm flight boards are supported. Here is a link to 3D printable pieces that work on this frame: https://www.thingiverse.com/thing:2816953

A battery strap is not included even though the description says one is. The 3D printed pieces look to be printed out of some bad PLA and snap pretty easily. This frame is not the same size as the Mode 2 Ghost frame so 3D pieces printed for either frame will not fit the other. The Ghost uses lock nuts below each of the spacers, this frame does not. The screws go through the lower plate, arms, and directly to the spacers. The arms were not all cut the same direction from the sheet of carbon fiber. The frame does look good. There is plenty of room inside even for first time builders. If you use 2 battery straps, which should fit, your battery will have a very hard time coming out during crashes. 30.5x30.5mm and 20x20mm flight boards are supported. Here is a link to 3D printable pieces that work on this frame: https://www.thingiverse.com/thing:2816953

A battery strap is not included even though the description says one is. The 3D printed pieces look to be printed out of some bad PLA and snap pretty easily. This frame is not the same size as the Mode 2 Ghost frame so 3D pieces printed for either frame will not fit the other. The Ghost uses lock nuts below each of the spacers, this frame does not. The screws go through the lower plate, arms, and directly to the spacers. The arms were not all cut the same direction from the sheet of carbon fiber. The frame does look good. There is plenty of room inside even for first time builders. If you use 2 battery straps, which should fit, your battery will have a very hard time coming out during crashes. 30.5x30.5mm and 20x20mm flight boards are supported. Here is a link to 3D printable pieces that work on this frame: https://www.thingiverse.com/thing:2816953

Рама приходит в коробке. Вырезана хорошо. Толщина пластин соответствует заявленным. Есть запасные винты. Есть Два минуса- вес 59гр(заявленно 55гр) и ремешка нет. Но это не портит впечатления от покупки. Рама нравится.

Рама приходит в коробке. Вырезана хорошо. Толщина пластин соответствует заявленным. Есть запасные винты. Есть Два минуса- вес 59гр(заявленно 55гр) и ремешка нет. Но это не портит впечатления от покупки. Рама нравится.

Рама приходит в коробке. Вырезана хорошо. Толщина пластин соответствует заявленным. Есть запасные винты. Есть Два минуса- вес 59гр(заявленно 55гр) и ремешка нет. Но это не портит впечатления от покупки. Рама нравится.

Got two of these to try. They came decently packed, is a CF frame so no need for fancy packages. It brings all the hardware, nuts and screws as well as the 3D printed parts. While I have seen some reviews saying they were using some brittle plastic the ones I received are in what looks like red TPU, it is a flexible material. The CCD mounts are a bit too short for the micro foxeer ccd but it would work if needed. They also fit snug in the standoffs and not loose as I have seen in some reviews, s

Got two of these to try. They came decently packed, is a CF frame so no need for fancy packages. It brings all the hardware, nuts and screws as well as the 3D printed parts. While I have seen some reviews saying they were using some brittle plastic the ones I received are in what looks like red TPU, it is a flexible material. The CCD mounts are a bit too short for the micro foxeer ccd but it would work if needed. They also fit snug in the standoffs and not loose as I have seen in some reviews, s

Got two of these to try. They came decently packed, is a CF frame so no need for fancy packages. It brings all the hardware, nuts and screws as well as the 3D printed parts. While I have seen some reviews saying they were using some brittle plastic the ones I received are in what looks like red TPU, it is a flexible material. The CCD mounts are a bit too short for the micro foxeer ccd but it would work if needed. They also fit snug in the standoffs and not loose as I have seen in some reviews, s

🙌🙌🙌🙌🙌🙌❤❤❤🎉🎉🎉👍👍👍👍 👏 👏 👏👏 🇲🇾 🇲🇾 🇲🇾 🇲🇾 i like this bro

🙌🙌🙌🙌🙌🙌❤❤❤🎉🎉🎉👍👍👍👍 👏 👏 👏👏 🇲🇾 🇲🇾 🇲🇾 🇲🇾 i like this bro

🙌🙌🙌🙌🙌🙌❤❤❤🎉🎉🎉👍👍👍👍 👏 👏 👏👏 🇲🇾 🇲🇾 🇲🇾 🇲🇾 i like this bro

Very item good delivry good and Thank very much for item 👌👌👌🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾

Very item good delivry good and Thank very much for item 👌👌👌🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾

Very item good delivry good and Thank very much for item 👌👌👌🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾🇲🇾

Aun no he montado el drone pero contento con la compra frame super ligero pero hay que elegir muy bien los componentes ya que apenas tiene espacio. Los acabados de la fibra de carbono no son muy buenos ya que el corte es algo afilado

Aun no he montado el drone pero contento con la compra frame super ligero pero hay que elegir muy bien los componentes ya que apenas tiene espacio. Los acabados de la fibra de carbono no son muy buenos ya que el corte es algo afilado

Aun no he montado el drone pero contento con la compra frame super ligero pero hay que elegir muy bien los componentes ya que apenas tiene espacio. Los acabados de la fibra de carbono no son muy buenos ya que el corte es algo afilado

ghost frame clone low cost. but arm motor screw hole small. So I used a drill. It was hard.

ghost frame clone low cost. but arm motor screw hole small. So I used a drill. It was hard.

ghost frame clone low cost. but arm motor screw hole small. So I used a drill. It was hard.

the frame is a pretty decent clone of the mode 2 ghost. my frame however didn’t come with the stand-offs and it was missing 4 lock nuts if it was supposed to have 4 included under the stand-offs like the real frame includes. there was also no battery strap included like the description says would be included. If everything that was supposed to come with the frame was included I would recommend for anyone to purchase this as a test to see if they wanted to order the real deal. I normally use these clones for exactly that reason like a taste test to see if I want to order the whole meal so to speak. Be ready with a small diamond file because the carbon fiber really needs a once over to make it nice and smooth and it also makes it much more visually appealing!

the frame is a pretty decent clone of the mode 2 ghost. my frame however didn’t come with the stand-offs and it was missing 4 lock nuts if it was supposed to have 4 included under the stand-offs like the real frame includes. there was also no battery strap included like the description says would be included. If everything that was supposed to come with the frame was included I would recommend for anyone to purchase this as a test to see if they wanted to order the real deal. I normally use these clones for exactly that reason like a taste test to see if I want to order the whole meal so to speak. Be ready with a small diamond file because the carbon fiber really needs a once over to make it nice and smooth and it also makes it much more visually appealing!

the frame is a pretty decent clone of the mode 2 ghost. my frame however didn’t come with the stand-offs and it was missing 4 lock nuts if it was supposed to have 4 included under the stand-offs like the real frame includes. there was also no battery strap included like the description says would be included. If everything that was supposed to come with the frame was included I would recommend for anyone to purchase this as a test to see if they wanted to order the real deal. I normally use these clones for exactly that reason like a taste test to see if I want to order the whole meal so to speak. Be ready with a small diamond file because the carbon fiber really needs a once over to make it nice and smooth and it also makes it much more visually appealing!

what a great frame fly amazing eligant fast really responsive https://youtu.be/Ex9t6NauAn4

what a great frame fly amazing eligant fast really responsive https://youtu.be/Ex9t6NauAn4

what a great frame fly amazing eligant fast really responsive https://youtu.be/Ex9t6NauAn4

Gooood product!

Gooood product!

Gooood product!