Enviar a United Kingdom , USD
Revisión positiva superior para %s en Banggood, Compre el mejor %s con el precio más bajo en Banggood. Explore la reseña positiva más útil para %s antes de comprar., juguetes rc, deportes divertidos, moda, electrónica popular
Zorglub 24/01/2016
To communicate with this module via USB you will need a terminal emulator (I used "CoolTerm") and a CH340 driver. To install the driver, I used the instructions at http://0xcf.com/2015/03/13/chinese-arduinos-with-ch340-ch341-serial-usb-chip-on-os-x-yosemite/. This doit.am version wakes up running a wireless access point with SSID DoitWiFi. If you connect to this access point and then point your web browser to http://192.168.1.1. This will show you a web page that lets you toggle the voltage on a couple of the hardware pins. If you set D0 to 0, a blue light on the board goes on. To connect to the access point you need a password. It's specified on the doit.am site as 12345678, but that did not work for me. You can, however, easily change the password via the USB interface, with code like this: cfg={} cfg.ssid="DoitWiFi" cfg.pwd="password" wifi.ap.config(cfg)
13
Comentarios
Enviar
Encuesta de satisfacción

Descargar la APP y obtener extra cupón de 10%dto