Customer Reviews

4.91 out of 5
See all 162 reviews
Write a Review
  • All Reviews (162)
  • Image (48)
  • Video (2)
  • All Star
    • All Star(162)
    • 5 Star(151)
    • 4 Star(9)
    • 3 Star(1)
    • 2 Star(1)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
Show Original

A part of the review has been auto-translated.

  • 07/07/2021

    This CineLog 25 micro KWAD is just GREAT! Not so loud compared to other similar quads like beta95x or Flywhoo LR. Much less sound than iFlight ones. No need to solder the RX wires if you get BF version, ther will be 3 pin connecotr out, just connect your RX set it up in Betaflight (all settings are pretuned! so only rx type and rates and modes need to be prechecked). CineLog 25 can handle crashes very nice, had a dive crash into concrete all went well not a single mark. There is extra connector for your Gopro Lite or GepRc HD and SMO cameras, main camera is mounted on dampers together with HD cam, from one hand it's neat no shake in video feed. Need an USB adapter for better access of USB port. Comes with several set of props with 650mah battery and gopro 6 lite, it can fly great for 5-7 mins, very nice balance between prop,motor,weight ratio. U'll find some TPU parts in package also. Sample video: I had upgraded mine from NO rx version to Caddx ViŠta and crossfire, so now perfect image for several miles! Over all this is a really nice cineWhoop style quad with acro abilities and long flight time, pre-tuned and well made.

    Comments (5)
    Show Original
  • 18/03/2021

    It's the Perfect CineWhoop! There is no vibration or jello in the FPV camera. Propeller sound is very quiet. The PIDs and filters have been tuned by the manufacturer. Remote control for GoPro Lite camera is also set up!

    Comments (2)
    Show Original
  • 02/09/2021

    Delivery fast! Less than two weeks. The box arrived as if an elephant had sat on it... but inside everything is whole! consider the baptism of battle by the post of russia the apparatus successfully passed, since the post failed, so it is impossible to break it! ))))) According to the practice of flight - the device is stable as nobody before, there was a bunch of 5" of them all shaking, jelly, propvosh.. one was the device on the Kisa, that less exactly flew... This one's right on the rails. But you have to get used to it, it's not 5", there's not a lot of dope and it shakes the roll.. it's a matter in hands, it needs a habit... Camera section, turned out instead of 63 grams 23 grams! in total 40 grams, it's almost the weight of the battery! Cool! Batki better than 3S 450mahs for a perfectly smooth flight, if a little fry, then 4S 650 machs... 850 heavy - handed... gets clumsy What else.. apparatus is pleased! Unambiguously worth its money.... Although... Could be cheaper ))) Just in case I'm gonna leave a screenshot of the sewer pussies, see if anyone's gonna need it.

    Show Original
  • 06/04/2021

    Very good Cinewoop of Geprc , I have the analog version because I am not yet equipped for digital , Just the original fpv camera a Caddx eos2 is not terrible in terms of image quality. I plan to replace it with a Caddx Baby Ratel V2. Otherwise it's the most stable and reactive cinewoop 2.5" pusher I've had, no Jello! we can even do some freestyle . With a GoPro Naked or an Insta Go2 Making fantastic videos has never been easier.

    Comments (6)
    Show Original
  • 18/05/2022

    the best kinematic drone for indoors and it is perfect outdoors too if you don't require great speeds and if there is a tornado outside! It's just a little difficult to operate in it, since space is small. i had to mount the elrs receiver on it and i was able to solder it without disassembling everything as they say, just unscrew the bottom plate to which the vtx is attached, and very carefully you can access the fc pads for the receiver.

    Comments (2)
    Show Original
  • 09/10/2021

    Perfect for their purpose, it seems they chose to swap the caddx camera for runcam nano 2 👌 In my case, with opentx 2.X on the transmitter it was necessary to install on the r-xsr receiver the old firmware -191128 which is no longer on the frsky 🤨 page, if anyone needs it you will easily find information and download links on Youtube

    Comments (1)
    Show Original
  • 07/07/2022

    Ordered June 26th, 7th. Get July. Super fast! Allles with it, nothing damaged. Test flight successful. Everything as promised, good quality. Thx to seller and bb

    Show Original
  • wladB

    super light and nice in hand not to big not to small its important and very good PID setup

    Show Original
  • 04/12/2021

    finally recived this geprc cinelog25...

    Show Original
  • 01/11/2021

    The goods reached Peter in nine days, not yet plugged in, on appearance everything is excellent.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$99.74
    • US$75.99
    • US$103.99
    • US$168.99
    • US$135.99
    • US$112.99
    • US$90.25
    • US$256.49
    • US$135.84
    • US$419.99