Precise details:
Notice: Will send V1.2 Version in CN Warehouse.
Still old version in CZ Warehouse.
( March 4th, 2022. BeiJing Time)
Main Changelog :
1) Upgrade Robo1202.5 5500KV to Nin V2 1203PRo 5500KV . More Powerful, Power increased by 15%.
2) Use Gemfan 1636 40mm-4 V2.0 Propellers , more durable
| Old Version | New V1.2 Version |
Robo 1202.5 5500KV 2-4S Motor
Stator diameter: 12mm
Stator height: 2.5 mm
KV: 5500KV
Shaft size: M1.5
Pattern: 9×9 mm
Weignt:3.8g
| Nin V2 1203Pro 5500KV
Configu-ration :9N12P
Stator Diamter : 12mm
Stator Length : 3mm
Shaft Diameter : 1.5mm
Motor Dimension(Dia.*Len) : Φ16.2*9.9mm
Weight(g) : 4.7(3cm wire)
Idle current(10) : @10V(A) : 0.7
No.of Cells(Lipo) : 3~4S
Max Continuous Power(W) 3S : 96.2
Internal Resistance : 350mΩ
Max Current(3S) : 6.5A
Max.Effciency Current : (0.5-1.6A)>84%
|
HQProp 40mm 4-Blade Propeller Brand Name: HQProp
Model: Micro Whoop 40mmx4
Quantity: 2 CW & 2 CCW
Shaft : 1.5
Hub Diameter: 6mm
Hub Thickness: 5mm
| Gemfan 1636 40mm-4 V2.0 Propeller Weight:0.61g
Material:PC
Pitch:3.5 inch
Props Dia:40mm
Center Thickness:5.2mm
Center Hole Dia:1.5mm Quantity: 2 CW & 2 CCW
|
Introduction:
In an effort to push the boundaries of carry the camera on the smallest platform, Flywoo designed the smallest hexacopter possible in their history.Firefly Hex nano , a nano- sized fpv drone designed to carry Insta 360go ，SMO 4K camera for some action flying.Weighing in at just 57.9g , the Firefly hex nano is small , flexible, stable , but is full of power and offers unmatched control . Pilots can quietly enjoy the fun of shooting a video without jelly.The Hex nao is equipped with GOKU HEX 13A STACK and 6pcs ROBO 1202.5 5500KV motors, to bring the Firefly a quiet, stable, flexible and long flight time characteristics. Perfect for the indoor and outdoor recording every beautiful flying moment!
Description:
Brand: Flywoo
Item Name: Firefly hex nano ( without GPS Version)
Item Name: 90mm GOKU F4 13A ESC 4S 1.6 Inch Hexacopter
Wheelbase: 90mm
Camera Degree: 15°-90°
Weight: 57.9g (without battery)
| GOKU Hex F4 FC & 13A ESC Stack | SIZE: 22x23mm
Hole: 16x16mm (M3) Input Voltage: 2-4S
MCU: STM32F411
UARTS: U1/U2
Soft UART: SU1/SU2
I2C: SCL/SDA
GYRO: MPU6000
LED:4*WS2812
FLASH: 8M
BEC: 5V 2A
BS13A BLheli_S 2-4S 6in1
- Support Oneshot42/125, Multishot, DShot150/300/600
|
| GOKU VTX625 450mW VTX | Item Name: 5.8G 48CH PIT/25/50/100/200/450mW Switchable Raceband: 5362-5945 MHZ
Power: PIT/25/50/100/200/450mW switchable
Control Mode:IRC(RX)/Button
BAT: +5V Input
Video System: NTSC/PAL
Antenna: IPX
Size: 30mm×30mm×4mm
Weight: 1.3g
|
| Caddx ANT 1200TVL FPV Camera | Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
Lens: 1.8mm
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm
Wide Power Input: DC 3.7-18V
Weight: 2g (N.W.)
|
| 5.8G FPV Antenna | Atomic 5.8GHz Antenna Length 30mm RHCP |
Recommend Lipo Battery ( NOT Included): 4S 450mAh / 4S 300mAh 75C Battery XT30 Plug
About 4 min flight with Explorer 300mAh 4S battery; About 6 min flight with Explorer 450mAh 4S battery
Notice: The Insta360 Go, SMO 4K Camera and Camera Mount of them are NOT Included in pacakge, need buy extra together.
3D Printing TPU Camera Mount for Insta360 Go / SMO 4K
Replace Upper Plate / Replace Bottom Plate
Replace Empty Frame Kit ( Analog Version)
Package Included:
1 x Prebuilt and tested Firefly hex nano hexacopter
2 x HQ 40mm 4-Blades Props
2 x Lipo Strap
