Customer Reviews

4.89 out of 5
See all 711 reviews
Write a Review
  • All Reviews (711)
  • Image (140)
  • Video (8)
  • All Star
    • All Star(711)
    • 5 Star(665)
    • 4 Star(26)
    • 3 Star(12)
    • 2 Star(4)
    • 1 Star(4)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 24/05/2017

    Good flightcontroller in combination with the DYS 4-in-1 ESC. I had to connect the receiver to TX3, instead of RX3 like on my other flightcontrollers to get XBus to work (Multiplex receiver). Also be aware that the XT60 cable might have switched cable colors! (See uploaded picture)

    Comments (1)
    Show Original
  • 04/08/2017

    Nice well built Flight Controller Just has too much noise without a Low ESR Cap

    Comments
    Show Original
  • 19/07/2017

    When I first ordered this I didnt realise that this was an aio (all in one) board. The fact that this is a pdb and a fc at the same time just makes builds so much cleaner. Great for low profile frames and the kit is great. The fact that it comes with a pigtail xd60 a buzzer and a built in osd is just great as well. Another plus is the fact that you can solder on both sides of the board for the escs as well as the included soft mount grommets. I love this board!

    Comments
    Show Original
  • 09/12/2017

    Muy buena controladora, me funcionó al flashearla con betaflght como dysf4pro en vez de omnibusf4 como ponía en el manual, muy recomendada. También cabe destacar que el buzzer no es muy ruidoso y las intrucciones no son del todo claras. El UART 1 es la emisora y el 3 la telemetría como smartport si tieens frsky

    Comments
    Show Original
  • 14/10/2017

    I down loaded a diagram for this great board. I am a spektrum user. And was using Rx3 for my Sat input. Rx3 is where the Tx3 should be.

    Comments (1)
    Show Original
  • 12/05/2019

    Muy buena presentación. Vienes con xt60, cables, un zumbador, tornilleria de nylon y gomas para las vibraciones. La placa se ve de bastante calidad, ahora hay que ver cómo aguanta los golpes 😅

    Comments
    Show Original
  • 28/01/2018

    The flight controller is great and solid like the first version especially now the pins are gone and the flex cable is in its place. BUT you need to know if you intend on running smartport telemetry the uart 3 tx/rx has been flip flopped again so you need to connect your uninverted signal to what the diagram shows is “RX3” also there is no additional inverter that I could find for uart 3.

    Comments
    Show Original
  • 10/07/2017

    Unfortunately no inverter function with BF 3.1.7 and frsky x4r sbus/telemetry . Please use BF 3.1.6.

    Comments (1)
    Show Original
  • 24/01/2018

    complete controller, some of the best on the market!

    Comments
    Show Original
  • 24/10/2017

    This is a replacement for my controller. This product works very well, there are no problems. The OSD is working properly. Installed with the regulators 4 in 1. To work the current sensor, do not forget to connect the 4 in 1 regulators from the battery through the controller! Then the current sensor will work! I advise everyone to buy!

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$63.99
    • US$6.99
    • US$42.99
    • US$20.99
    • US$39.95
    • US$41.99
    • US$13.49
    • US$5.99
    • US$39.99
    • US$79.99
    • US$105.99
    • US$9.99
    • US$13.99
    • US$25.64
    • US$67.23
    • US$99.99
    • US$63.99
    • US$99.99