{{$productInfo.reviewAmount.average}} out of 5
Note: Because the MPU6000 is out of production, the flight controller and related Drone be replaced by mpu6500 or BMI270.
Notice:
1. Because the Caddx Turbo Eos2 Camera has been stopped produced, at present, this drone will replace it into Runcam Nano 2
NTSC 4:3 FPV Camera. ( 14x14x16mm)
2. At present, CN warehouse old and new are Mix, will send radomly.
April 14th, 2021, BeiJing Time
Notice:
CN warehouse will send new version XF5804PRO 25/100/200/600mW VTX,Overseas warehouse are old version with Xf5804 5.8G 40CH 0mW/25mw/200mw/600mw switchable VTX.
| Old VTX | New VTX |
Output power & transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW Transmitting power: 0mW/25mW/200mW/600mW Full video format: NTSC /PAL Input voltage & power dissipation: 7V~24V, +12V/260mA@600mW Size: 20*30*9mm Weight: ≤7g(except antenna) With output power self-check function. Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw) Frequency control method: Button frequency control (1-8): press the button for 2 seconds to enter the frequency setting, and press the button to change the frequency CH1-8.Change the frequency band (A-E), set the frequency, press the button for 2 seconds, then press the button to change the frequency group FR (A-E) | Model: XF5804PRO Input voltage: 7-26V Onboard BEC output: 5V Number of launch channels: 40 Transmit power: 25/100/200/600mW Video format: PAL/NTSC Operating temperature: Control Protocol: TBS SmarAudio Antenna Connector: MMCX Wiring method: SH1.0-6P/pad Mounting hole: 30.5*30.5mm Size: 36*36mm |
Notice: It is DIY Version that comes unassembled.
The propeller color is Green & Yellow & Red and Transparent White.
Upgrade Diffirence from Tyro99
Take OFF Weight: 400g approxi.
| Item | Specification |
| 210mm Frame Kit |
Wheel base: 210mm
Frame arm thickness: 5mm
Bottom plate thickness: 2mm
Side plate thickness: 2mm
Frame kit material: 3K carbon fiber & 6065 aluminium
|
| 2206 2400KV Brushless Motor |
KV: 2400KV
Idle current (Io/10V): 1.35A
Lipo cell: 3-5S
Weight: 31g
Max continuous current: 35A
Max continuous power: 560W
Max thrust: 1180g (4S/5")
Configu-ration: 12N/14P
Motor resistance (RM): 0.0536 Ω
Stator diameter: 22mm
Stator thickness: 6mm
Motor diameter: 27.7mm
Motor body length: 19.2mm
Overall shaft length: 34.2mm
Prop adapter shaft: M5
Bolt holes spacing: 16mm
Bolt thread: M3
Propeller: 5-6 inch |
| 4 IN 1 30A BLHeli_S ESC |
Continuous current: 30A
Burst Current: 40A(10S)
Input voltage: 2-5S
BEC: 5V 2A BEC
Main control chip: 48Mhz EFM8BB2
Firmware: BLHeli_S supports Dshot600
MOS: 5*6 |
| New F4 Flight Controller ( More Details, Click here) |
Main control chip: STM32F405
Sensor: ICM20602
Power supply: 5V
Integrated OSD
Onboard LC filter
PID cycle rate & gyroscope refresh rate up to 32Khz
Supports BetaFlight / inav racing firmware
|
| Caddx Turbo Eos2 1200TVL Camera |
FOV: 160°
WDR: Global WDR
DNR: 2 DNR
Lens: 2.1mm
TV System: NSTC / PAL Optional
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
Latency: min 3ms
Resolution: 1200TVL
Min. Illumination
Wide Power Input
Work Temperature
Image Sensor: 1/3 inch COMS
Aspect Ration: 4:3
S/N Ratio
Video Output
Auto Gain Control
BLC
Dimensions
|
| Xf5804 5.8G 40CH 0mW/25mw/200mw/600mw switchable VTX |
Output power & transmission distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW
Transmitting power: 0mW/25mW/200mW/600mW
Full video format: NTSC /PAL
Input voltage & power dissipation: 7V~24V, +12V/260mA@600mW
Size: 20*30*9mm
Weight: ≤7g(except antenna)
With output power self-check function.
Nixie tube SCAN: frequency point (1-8), frequency band (A-E), power (1-3, 0=0mw, 1=25mw, 2=200mw, 3=600mw)
Frequency control method:
Button frequency control (1-8): press the button for 2 seconds
to enter the frequency setting, and press the button to change
the frequency CH1-8.Change the frequency band (A-E), set the
frequency, press the button for 2 seconds, then press the button
to change the frequency group FR (A-E)
|
| Pagoda Antenna |
Gain: 5dBi
Max. Power: 50w
Connector: RP-SMA
Color: Black
Weight: 8.6g
Length: 78±3mm
Max. Dia.: 22.4±1mm
Min. Dia.: 11.8±1mm
Frequency: 5.8G
Impedance: 50Ω
VSWR: <1.5:1
Polarization: Circular Polarized
Radiation: Omni
|
| 5040 5 Inch 4-Blade Propeller |
Material: PC
Mounting hole: 5mm
Center thickness: 8mm
Quantity: 2 CW + 2 CCW ( Same Color)
Color: Green & Yellow & Red and Transparent White ( Delivery color randomly)
|
| Battery |
Not included Recommend 3-5S |
| Shipping method(s) | Shipping time | Tracking information |
|---|