A part of the review has been auto-translated.
Put the unit together and all seems to fit apart from Id say the belt it maybe 1 or 2 teeth short as when I run my gantry up to the very top the stress on the rods is too much for the motor and it skips steps, but if Im only going up to 190mm high its working great, maybe over time the belt will loosen off a bit. It was also missing t-buts for the upper middle belt tensioner (which is not really needed as the belt it probably too tight rather than being loose enough to need a tensioner). lead screws are nice and straight and the bracket to fit onto the RHS of the X gantry fits great. I did have to design and 3D print a piece to fit under the RHS rod bearing holder to stop the RH lead screw - I added a photo of it (printed in white with an M3 nut and bolt.
Flawless. Parts fit very well on my end 3. The timing belt is a bit short. You don't need the belt tensioner.
It does not come with instructions but any skilled DIYer could manage it. Check some YouTube videos if necessary. All the items required are there. The belt need to be put in place before installing the geared pulley, because the belt is not very stretchable. Make sure that the 2nd Z screw is aligned as much as possible to the frame and loosen up the T8 nut which will help with the screw wobble. Do not forget to put some grease on the screws.
The threaded bars came straight, despite the packaging not being the best. The pieces had not been stuffed. There is a lack of paper instructions. There are videos on the internet of how to mount it even though printed instructions would have been handy. the printer with this modification no longer has the problem of synchronism with the double Z axis. I recommend the purchase.
I didn't take a assembled photo, but it works wonderfully! Unfortunately, my Ender 3 is rarely in use since I bought a new printer, but if I need to print more, I've already run both at the same time. I am satisfied, good quality, top!
Great product. Mine is fine but sticks came without any box. Luckily they didn't bend on the shipping.
Everything is alright.
Arrived quite fast and works perfectly!
very good, thank you, 🌟🌟
Good update for my Ender 3V2. The installation is easy and fast. I have added two axial ball bearings so that the second thread spindle cannot slip in the bearing.