Drillpro 51Pcs 1-6mm M35 HSS-Co Cobalt Drill Bit Set, Jobber Length Coil Drill Bits with Metal, Case for Stainless Steel Wood Metal Drilling - 51 pcs. Red metal box, contained 1-6 cobalt bits in 10-tenths of millimeter increments, sharpened with relief for better cutting, 135 degrees for carbide, the correct amount is not missing, appear in good condition edge conservation without rust, in the metal box broke the plastic handle, from the outside in the transport nothing unimportant, stick it does not affect the opening of the box, waiting to make test holes in appearance everything seems fine. Thank you so much.

Drillpro 51Pcs 1-6mm M35 Juego de brocas de cobalto HSS-Co, Jobber longitud Brocas helicoidales con metal, Caso para perforación de metal de madera de acero inoxidable - 51 piezas. Caja metálica de color rojo, contenido brocas de cobalto 1-6 en incrementos de 10 décimas de milímetro, afiladas con destalonado para mejor corte, grados 135º para metal duro, la cantidad correcta no faltan, parecen en buen estado filo conservación sin oxido, en la caja metálica rompió el tirador de plástico, del exterior en el transporte nada sin importancia, lo pegare no afecta a la apertura de la caja, en espera de realizar agujeros de prueba en apariencia todo parece bien. Saludos Gracias.

Drillpro 51Pcs 1-6mm M35 HSS-Co Cobalt Drill Bit Set, Jobber Length Coil Drill Bits with Metal, Case for Stainless Steel Wood Metal Drilling - 51 pcs. Red metal box, contained 1-6 cobalt bits in 10-tenths of millimeter increments, sharpened with relief for better cutting, 135 degrees for carbide, the correct amount is not missing, appear in good condition edge conservation without rust, in the metal box broke the plastic handle, from the outside in the transport nothing unimportant, stick it does not affect the opening of the box, waiting to make test holes in appearance everything seems fine. Thank you so much.

The goods are here

barang sudah sampai

The goods are here

They look good.We'll see how they behave when drilling into stainless steel.They are very good.

Vypadají kvalitně.Uvidíme jak se zachovají při vrtání do nerezu.They look very good.

They look good.We'll see how they behave when drilling into stainless steel.They are very good.

Appear to be a good set of drills. Drills are all very close to the stated size. The grind looks good on all the drills I checked. They are split point on 3.0 mm and above. In the small amount of use so far they cut very well. Only issue I have with them is the box they come in is a bit cheap - e.g. it is not easy to get the drills from the back positions in the two front rows without removing a drill in front first. Still I am very happy with the product.

Appear to be a good set of drills. Drills are all very close to the stated size. The grind looks good on all the drills I checked. They are split point on 3.0 mm and above. In the small amount of use so far they cut very well. Only issue I have with them is the box they come in is a bit cheap - e.g. it is not easy to get the drills from the back positions in the two front rows without removing a drill in front first. Still I am very happy with the product.

Appear to be a good set of drills. Drills are all very close to the stated size. The grind looks good on all the drills I checked. They are split point on 3.0 mm and above. In the small amount of use so far they cut very well. Only issue I have with them is the box they come in is a bit cheap - e.g. it is not easy to get the drills from the back positions in the two front rows without removing a drill in front first. Still I am very happy with the product.

Hello, they look good quality, still not tried. Greetings.

salve, sembrano di buona qualità, ancora non provate.Saluti.

Hello, they look good quality, still not tried. Greetings.

ok thank you

ok thank you

ok thank you

Very good product! He was punctual and well-grounded. I think it's a little expensive, but I recommend it to everyone. This is the smaller set ( 1-6 mm ). The larger stock is very expensive! Very good news! Accurate and well done. I want it a little bit, but I want it to go! This is the first set (1-6 mm).This is the first set (1-6 mm).This is the first set!

Nagyon jó termék ! Pontos és jól köszörült. Kicsit drágának tartom, de ajánlom mindenkinek! Ez a kisebbik készlet ( 1-6 mm ). A nagyobb készlet viszont nagyon drága ! Very good product! Accurate and well ground. I find it a little expensive, but I recommend it to everyone! This is the smaller set (1-6 mm). However, a larger set is very expensive!

Very good product! He was punctual and well-grounded. I think it's a little expensive, but I recommend it to everyone. This is the smaller set ( 1-6 mm ). The larger stock is very expensive! Very good news! Accurate and well done. I want it a little bit, but I want it to go! This is the first set (1-6 mm).This is the first set (1-6 mm).This is the first set!

Dommage that 6mm max

dommage que 6mm max

Dommage that 6mm max

I bought both the 1-6mm set and the 6-10mm set. At the time I ordered this, both the 1-6mm kit and the 6-10mm kit had the same part number and description. I got the correct kits in spite of this confusion. This is an OK set of metric drills. The 1.1 mm drill in my set is a bit short making it a bit difficult to grab. The wire that lifts the drill index out of the large bit case tends to bend the thin sheet metal of the drill case making it very difficult to remove the 9.2 and 9.4mm drills. Only drills 3mm-10mm are split point, the smaller drills are just normally sharpened. A few of the drills do not have the split point done very well. At least one drill was not ground enough to sharpen the entire cutting edge. The advertising copy on these sets do not indicate the accuracy of the diameter of these drills, so I measured all of them. They are all slightly under sized with a median error of -0.04 mm The minimum error was -0.005mm and the maximum error was -0.08mm This was the first metric set that I have found that covers the range 1 to 10 mm in 0.1mm steps. I was continually having to use numbered drills to approximate the correct drill size for metric taps. Most metric kits I've seen do 1mm or 0.5mm steps, this kit allows me to directly grab the correct size drill. This kit does not wow me with quality, but it also does not horrify me with the price. It is a reasonable price/quality tradeoff. This kit will serve the purpose I have for it.

I bought both the 1-6mm set and the 6-10mm set. At the time I ordered this, both the 1-6mm kit and the 6-10mm kit had the same part number and description. I got the correct kits in spite of this confusion. This is an OK set of metric drills. The 1.1 mm drill in my set is a bit short making it a bit difficult to grab. The wire that lifts the drill index out of the large bit case tends to bend the thin sheet metal of the drill case making it very difficult to remove the 9.2 and 9.4mm drills. Only drills 3mm-10mm are split point, the smaller drills are just normally sharpened. A few of the drills do not have the split point done very well. At least one drill was not ground enough to sharpen the entire cutting edge. The advertising copy on these sets do not indicate the accuracy of the diameter of these drills, so I measured all of them. They are all slightly under sized with a median error of -0.04 mm The minimum error was -0.005mm and the maximum error was -0.08mm This was the first metric set that I have found that covers the range 1 to 10 mm in 0.1mm steps. I was continually having to use numbered drills to approximate the correct drill size for metric taps. Most metric kits I've seen do 1mm or 0.5mm steps, this kit allows me to directly grab the correct size drill. This kit does not wow me with quality, but it also does not horrify me with the price. It is a reasonable price/quality tradeoff. This kit will serve the purpose I have for it.

I bought both the 1-6mm set and the 6-10mm set. At the time I ordered this, both the 1-6mm kit and the 6-10mm kit had the same part number and description. I got the correct kits in spite of this confusion. This is an OK set of metric drills. The 1.1 mm drill in my set is a bit short making it a bit difficult to grab. The wire that lifts the drill index out of the large bit case tends to bend the thin sheet metal of the drill case making it very difficult to remove the 9.2 and 9.4mm drills. Only drills 3mm-10mm are split point, the smaller drills are just normally sharpened. A few of the drills do not have the split point done very well. At least one drill was not ground enough to sharpen the entire cutting edge. The advertising copy on these sets do not indicate the accuracy of the diameter of these drills, so I measured all of them. They are all slightly under sized with a median error of -0.04 mm The minimum error was -0.005mm and the maximum error was -0.08mm This was the first metric set that I have found that covers the range 1 to 10 mm in 0.1mm steps. I was continually having to use numbered drills to approximate the correct drill size for metric taps. Most metric kits I've seen do 1mm or 0.5mm steps, this kit allows me to directly grab the correct size drill. This kit does not wow me with quality, but it also does not horrify me with the price. It is a reasonable price/quality tradeoff. This kit will serve the purpose I have for it.

its really hssco! good quality!

its really hssco! good quality!

its really hssco! good quality!