Customer Reviews

4.85 out of 5
See all 59 reviews
Write a Review
  • All Reviews (59)
  • Image (4)
  • Video (0)
  • All Star
    • All Star(59)
    • 5 Star(52)
    • 4 Star(6)
    • 3 Star(0)
    • 2 Star(1)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
Show Original

A part of the review has been auto-translated.

  • 02/10/2021

    The product came in 8 days or so. The packing box was very basic, and it was a bit torn apart (see pic). Luckily, the product was not damaged. The trademark was supposed to be "Lvdian", but it had another sticker, like "Drillpro" (see pic below), never mind. I used the battery "18V 3.0Ah-6.0Ah Battery Replacement for Makita 18V BL1830 BL1840 BL1850 BL1860 BL1835 194205-3 194309-1 LXT-400 Cordless Battery Power Tool Battery - 4.0Ah" and it suits all right and works fine. I have not used the hummer drill yet, which was more interesting to me. I will have to come back to that part. I hope it does the job all right. Over all, it looks good and I rather recommend it ...

    Show Original
  • 03/03/2020

    I am very fond of DIY and a few days ago said enough my previous battery drill also of 18 volts. It was made of nickel cadmium batteries, so after 12 years the change was more than justified. To buy one of prestige and renown I was out of budget, because I have decided to acquire this one. It is pretty, how and practical, plus it uses Makita batteries and equivalents. Of which I have several because I have an impact screwdriver of that mark. THIS TALABLE COMES WITHOUT BATTERY, so we should keep that in mind. It's coals, it's not brushless, but its low price justifies it. Personally I do not need such engines, although I recognize their advantages, as my works will be carpentry, and with this I have enough. It has surprised me by the smoothness and power that it has at all times control of the trigger and of the speed of rotation. Its characteristics are as follows: it has a maximum opening of the drill holder of 13 mm. With two speeds ranging from 0 to 450 the first, and from zero to 1500 the second. It has 20 levels of torque, and three modes of work, or operation. Screwed, bits, and hammer. Very good features for the price it has. The delivery was very fast, specifically seven days from when I placed the order until it arrived at my house. Recommended purchase if you are bricoladores and do not need a marce drill recognized and last generation. To date and from the tests I've done on him, very well.

    Comments (2)
    Show Original
  • 08/10/2020

    I am satisfied with the product. The shipment was fast, form CZ to HU. It has enogh power. Works well with my original 3Ah Makita battery. Goob built quality. I recommend it.

    Comments (2)
    Show Original
  • 08/02/2020

    I need two charger batteries For the product itself.

    Show Original
  • 27/12/2021

    Vynikajúca za dobrú cenu

    Show Original
  • 24/11/2021


    Show Original
  • 15/09/2021


    Show Original
  • 05/02/2022

    高速と低速の切り替えに不具合があります。 内部のギアのかみ合わせのタイミングが合わないようです。

    Show Original
  • 23/01/2020

    This device is a fair value for the money (i paid 40€) if you know upfront (!) that the specification of 90nm torque is not correct. I did a comparison test with a 45nm genuine Makita drill with the same battery, and this device is only as strong (and sometimes even a little weaker) than the Makita device. So, it clearly let's me believe that this 'Makita clone' is not as strong as it claims. So, i would never ever buy it as my primary drill in case i really need 90nm of torque. As a secondary device - keeping in mind it offers only 45nm of torque - it is ok. The housing is relatively sturdy, some knobs and handles are a little edgy, but for use in rough conditions (where you do not want to expose your primary drill to), a good choice. It is not a brushless motor, but for most occasional DIY workers this is not really differentiating factor. Most DIYers will not live to see the brushes to be worn out in their akku drills. So, the device not being brushless, is fine for a secondary device.

    Show Original
  • 26/03/2020

    works well, no brushless motor unfortunately. should not drop it with battery dr of n meters high then it breaks in 2. for the price it is best a good screwdriver. hammer stand is also doing fine. really sorry that it breaks so quickly, would be a winner differently. more power than the same makita original.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$69.99
    • US$39.99
    • US$55.99
    • US$48.99
    • US$70.49
    • US$49.99
    • US$189.99
    • US$86.99
    • US$64.99
    • US$45.99
    • US$24.99
    • US$90.99
    • US$64.99
    • US$34.99
    • US$79.99
    • US$44.99
    • US$45.99
    • US$6.99