It flies like a Stik should! This arrived in good time and good condition. It took very little time to install everything and the quality of each component was really good, even the stickers are already fitted. The only thing I found concerning was the front fixing for the wing, which were loose so I added more adhesive. Everything else was good. I'd probably beef up the undercarriage fixings for a rough grass field, but for most hard runways this is fine because all stiks can be slowed a lot for landing. The first flights have gone well. I'm using a 4S5000 battery and a 60amp speed controller with a 700 watt motor so I can climb vertically or float around at slow speed for twenty minutes or more. Loops are super easy, the rest will have to wait until I've had a chance to set up the controls, but all looks as it should its only downside is the lurid green covering, and it woud be nice to have the stock in a European store. Its new to the market, so I hope its going to stay available for several years, I'm sure that I'll want another.

It flies like a Stik should! This arrived in good time and good condition. It took very little time to install everything and the quality of each component was really good, even the stickers are already fitted. The only thing I found concerning was the front fixing for the wing, which were loose so I added more adhesive. Everything else was good. I'd probably beef up the undercarriage fixings for a rough grass field, but for most hard runways this is fine because all stiks can be slowed a lot for landing. The first flights have gone well. I'm using a 4S5000 battery and a 60amp speed controller with a 700 watt motor so I can climb vertically or float around at slow speed for twenty minutes or more. Loops are super easy, the rest will have to wait until I've had a chance to set up the controls, but all looks as it should its only downside is the lurid green covering, and it woud be nice to have the stock in a European store. Its new to the market, so I hope its going to stay available for several years, I'm sure that I'll want another.

It flies like a Stik should! This arrived in good time and good condition. It took very little time to install everything and the quality of each component was really good, even the stickers are already fitted. The only thing I found concerning was the front fixing for the wing, which were loose so I added more adhesive. Everything else was good. I'd probably beef up the undercarriage fixings for a rough grass field, but for most hard runways this is fine because all stiks can be slowed a lot for landing. The first flights have gone well. I'm using a 4S5000 battery and a 60amp speed controller with a 700 watt motor so I can climb vertically or float around at slow speed for twenty minutes or more. Loops are super easy, the rest will have to wait until I've had a chance to set up the controls, but all looks as it should its only downside is the lurid green covering, and it woud be nice to have the stock in a European store. Its new to the market, so I hope its going to stay available for several years, I'm sure that I'll want another.

The model appears to be almost identical to the E-flite Ultra Stick. This is an excellent model but spoilt by a few niggles. The balsa and ply model is constructed very nicely, with a good deal of attention paid to the structure. But the model is let down by poor choices of hardware. The covering job is excellent. The control horns are okay but none of the supplied screws to fit them, are long enough. The Ailerons and Flaps are well made but you cannot fit the flap servos/horns easily and you might need a servo reverser for flap operation. The ESC does not fit under the battery tray so it has to go in the battery space. The wing locating dowels didn't line up correctly with the pre drilled holes in the fuselage and I had to "oval out" the holes. Wheel spats are hard to get fitted straight and are only held in place by two small screws. I am still waiting for hardware to arrive for this model before I can fly it. I will reserve final judgement until then. With a bit more attention paid to the screws and fixings this would easily be a 5 star model. But I'll give it 4/5.

The model appears to be almost identical to the E-flite Ultra Stick. This is an excellent model but spoilt by a few niggles. The balsa and ply model is constructed very nicely, with a good deal of attention paid to the structure. But the model is let down by poor choices of hardware. The covering job is excellent. The control horns are okay but none of the supplied screws to fit them, are long enough. The Ailerons and Flaps are well made but you cannot fit the flap servos/horns easily and you might need a servo reverser for flap operation. The ESC does not fit under the battery tray so it has to go in the battery space. The wing locating dowels didn't line up correctly with the pre drilled holes in the fuselage and I had to "oval out" the holes. Wheel spats are hard to get fitted straight and are only held in place by two small screws. I am still waiting for hardware to arrive for this model before I can fly it. I will reserve final judgement until then. With a bit more attention paid to the screws and fixings this would easily be a 5 star model. But I'll give it 4/5.

The model appears to be almost identical to the E-flite Ultra Stick. This is an excellent model but spoilt by a few niggles. The balsa and ply model is constructed very nicely, with a good deal of attention paid to the structure. But the model is let down by poor choices of hardware. The covering job is excellent. The control horns are okay but none of the supplied screws to fit them, are long enough. The Ailerons and Flaps are well made but you cannot fit the flap servos/horns easily and you might need a servo reverser for flap operation. The ESC does not fit under the battery tray so it has to go in the battery space. The wing locating dowels didn't line up correctly with the pre drilled holes in the fuselage and I had to "oval out" the holes. Wheel spats are hard to get fitted straight and are only held in place by two small screws. I am still waiting for hardware to arrive for this model before I can fly it. I will reserve final judgement until then. With a bit more attention paid to the screws and fixings this would easily be a 5 star model. But I'll give it 4/5.